Festo MHJ valve series
25 May, 2010 | Supplied by: Festo Pty Ltd
The MHJ valve series has the ability to output very short pulses of air, which can result in energy savings and makes it suitable for various applications. It features a long service life and high precision with direct actuation for switching times of less than 1 ms, flow rates of 50, 100 and 150 L/min and repetition accuracy of less than 0.1 ms.
Festo MS6-SV soft start/exhaust valve with integrated safety relay
25 May, 2010 | Supplied by: Festo Pty Ltd
The Festo air-preparation range is designed to give users a certified unit that can be integrated into new or existing circuits, either standalone or housed in an air preparation module. As a supply device providing a safe exhaust function, it offers a number of possible applications and benefits.
Gems Sensors & Controls K Series inert isolation solenoid valves
17 May, 2010 | Supplied by: Control Components Pty Ltd
Gems Sensors & Controls has announced the K Series inert isolation solenoid valves. Constructed from chemically inert materials such as PTFE, ETFE, EPDM, FKM, FFKM, PEEK, PPS and PSU, the K Series of isolation valves is suitable for any application requiring various levels of chemical resistance or sample purity, such as liquid chromatography, gas analysers and water quality testers.
Custom Fluidpower's Sun Australian marketed range catalogue to be released
12 May, 2010
Custom Fluidpower's Sun Australian marketed range (AMR) catalogue will be released soon.
Hydac screw pumps
06 May, 2010 | Supplied by: HYDAC International
The Hydac screw pumps are suitable for industrial applications where high reliability and low noise are required. They produce low vibration and are optionally coupled with electrical motors.
How to use a regulator to reduce time delay in an analytical system
05 May, 2010 | Supplied by: Swagelok Corporation
Process measurements are instantaneous but analyser responses never are. From the tap to the analyser, there is always a time delay. Unfortunately, this delay is often underestimated or misunderstood.
Festo MS6-LRP-PO precision pressure regulator
28 April, 2010 | Supplied by: Festo Pty Ltd
The MS6-LRP-PO precision pressure regulator from Festo is suitable for use in the automotive industry and can now be used in balancer applications.
Festo CPE solenoid valve
28 April, 2010 | Supplied by: Festo Pty Ltd
The CPE solenoid valve from Festo can be used as an individual valve and now also on a sturdy aluminium manifold. It is designed to offer a long service life and optimum use of installation space.
CompAir SmartAir Master compressor controller
28 April, 2010 | Supplied by: CompAir (Australasia) Limited
CompAir has launched SmartAir Master, claimed to be a simple-to-install control system that provides detailed management reports to help plant engineers improve the performance and efficiency of a compressor network.
Champion Compressors EcoPak compressors range
20 April, 2010 | Supplied by: Hitachi Global Air Power
Champion Compressors has launched the EcoPak range of compressors. Combining variable speed drives (VSD) with variable output control (VOC), Champion has developed a compressor family that delivers energy-efficient compressed air at the top end of its capacity, and also offers a wide turn-down. The EcoPak is therefore designed for the efficient production of compressed air for applications where there are widely varying compressed air demands.
SMC LVN series chemical needle valves
08 April, 2010 | Supplied by: SMC Australia | New Zealand
The LVN series of chemical needle valves from SMC has been developed to overcome bubble generation when using light liquids in the fluid circuit, during the manufacturing process.
SMC series MY3M rodless cylinder
08 April, 2010 | Supplied by: SMC Australia | New Zealand
The series MY3M from SMC is a space-saving, lightweight, mechanically jointed rodless cylinder with a high load capacity. Designed to complement the MY3 range, it features a slide bearing which improves both load weight and load movement performance.
Hydac AutoFilt RF3 automatic backflushing filter
24 March, 2010 | Supplied by: HYDAC International
The AutoFilt RF3 automatic backflushing filter is designed for continuous filtration applications, including those in power stations, chemical and steel industries, in sewage treatment plants and environmental technology.
Boge ED series refrigerant dryers
24 March, 2010 | Supplied by: Boge Compressors (Australia) Pty Ltd
One of the most economic methods of treating compressed air is with a refrigerant dryer. By cooling the compressed air down to near freezing point, the water and oil vapour are condensed and particles of dirt are bound together and resulting condensate is then separated from the air flow. In most cases, the pressure dewpoint need only be a few degrees lower than the ambient temperature to prevent condensate from forming in the pipes.
SprayLogic MVHP series spray tips
24 March, 2010 | Supplied by: SprayLogic
SprayLogic has announced that it has added high-pressure spray tips to its range of high- and low-pressure spraying equipment. The MVHP Series, these spray tips are built using a design and manufacturing approach that is intended to ensure accuracy and provide consistent durability and performance for all types of high-pressure applications.
