Rotork CVA electric valve actuators
24 March, 2010 | Supplied by: Rotork Australia
The Rotork CVA range of electric actuator is designed to provide continuous, repeatable modulating control with a programmable fail-to-position option. Operating on a 4-20 mA control signal or digital bus, the resolution, repeatability and hysteresis performance of the CVA is quoted at <0.1% of full scale.
Metal Work Pneumatic Clever Multimach valve island subsystems
10 March, 2010 | Supplied by: Metal Work Pneumatic Australia Pty Ltd
Metal Work Pneumatic has released the Clever Multimach valves, which can be used to form autonomous and intelligent valve island subsystems. Each valve has a microchip that performs a series of functions connected with the operation and dialog with the other valves in the terminal.
Westfall static mixer
15 February, 2010 | Supplied by: H2O Rx
H2O Rx has launched a range of wafer-style static injection mixers from Westfall Manufacturing Company.
Compressed air auditing shows huge savings potential
11 February, 2010
A compressed air auditing program developed by the Electricity Commission is set to play a significant part in achieving targeted energy savings of $2 billion a year for the New Zealand manufacturing sector within five to 10 years.
Festo MS6-SV soft-start/exhaust valve
07 February, 2010 | Supplied by: Festo Pty Ltd
The MS6-SV is a soft-start/exhaust valve designed to meet the requirements of AS 4024 Category 4 and ISO 13849-1 performance level ‘e’. The unit can be integrated into new or existing circuits, either stand-alone or housed in an air preparation module.
MTA DE refrigerated air dryers
07 February, 2010 | Supplied by: SCS Filtration Pty Ltd
SCS Filtration has announced a range of refrigerated air dryers from MTA. The MTA range of DE dryers range in size from 0.3 to 37.5 m3/min and is available with sizes from 0.6 to 14 m 3/min.
H2O Rx ECO Valve
22 January, 2010 | Supplied by: H2O Rx
With an optional gauge port available in the flow direction of choice, a high flow capacity and a high ambient temperature range, the ECO Valve is designed to be versatile in a range of environments. It is available in PVC, CPVC, polypropylene, PVDF or stainless steel.
Festo DPA pressure booster
14 January, 2010 | Supplied by: Festo Pty Ltd
New variants of the pressure booster DPA can help to reduce the costs of compressed air directly within the application. A new polyurethane piston material increases product service life from 1000 to 2000 operating hours.
Tolomatic IMA integrated-motor electric actuator
14 January, 2010 | Supplied by: Pneumatic Products
The integrated-motor actuator (IMA) from Tolomatic combines a servo motor with Tolomatic’s rod-style actuator in a compact package. The IMA’s integrated design provides higher dynamic performance by eliminating the need for separate motors, couplers, motor mounts, gearing and belts. The result is reduced component costs, assembly time and failure points.
CompAir 7-11 kW range of oil-lubricated screw compressors
12 January, 2010 | Supplied by: CompAir (Australasia) Limited
CompAir has launched a 7-11 kW range of oil-lubricated screw compressors designed to deliver high reliability with low service and installation costs.
Compressor controller reduces energy costs
11 January, 2010 | Supplied by: CAPS Australia Pty Ltd
Operators of multiple compressors can achieve significant energy savings thanks to the Ingersoll Rand X-Series System.
VSD compressors
09 December, 2009 | Supplied by: CAPS Pty Ltd
With electricity prices set to double over the next few years and the federal government committed to reducing greenhouse gas emissions, buyers of new compressors should assess the energy-efficient benefits of variable speed drive (VSD) air compressors.
Compair L11VS to L18VS range variable speed compressors
02 December, 2009 | Supplied by: CompAir (Australasia) Limited
CompAir has extended its portfolio of variable speed compressors with the launch of seven new models, to offer a comprehensive range of energy-efficient rotary screw machines from 11 to 250 kW.
Series ZP2V vacuum saving valves
13 November, 2009 | Supplied by: SMC Australia | New Zealand
Developed initially for the semiconductor market, the Series ZP2V vacuum-saving valves are designed to shut down the suction line when any leakage is detected from the vacuum pad not being fully aligned with the work piece or when the work piece is missing.
Vacuum valve brings energy-saving benefits
11 November, 2009
Machine builders using vacuum for handling or pick-and-place applications now have an energy-saving option with the Series ZP2V vacuum saving valve from SMC.
