Parker ATEX- and IECEx-certified process actuators and valve controls
17 March, 2011The Parker range of ATEX- and IECEx-certified process actuator and valve control products is now available.
Control valves enable safer dust suppression process in open-cut mine
02 March, 2011Effective dust control around mine sites is critical from an environmental as well as from a health and safety perspective.
Firestone 70-P-13 Airomatic polyactuators
01 November, 2010 byTiny but robust pneumatic actuators are available from Air Springs that stand 16 mm high deflated and have a stroke of more than 12.5 mm.
Beck drives electric actuators
01 November, 2010 byBeck drives are designed electric actuators that offer consistent, precise control without the performance and maintenance limitations of typical actuators. Unlike pneumatic and conventional electric actuators, the drives can withstand continuous duty modulation without degradation of performance. The electric actuators combine the positioning necessary for optimum control with the reliability to keep the process running.
YTC YT-2501 smart valve positioner with remote sensor
17 September, 2010 byThe YT-2501 smart valve positioner from YTC has a remote sensor that is fitted to the actuator with the valve positioner located away from excessive heat or vibration. Communication between the sensor and positioner is via a communications cable that can be ordered to suit various distances.
SMC Pneumatics CP96 profile and C96 tie-rod design cylinders
12 August, 2010 byDesigned to meet the latest ISO 15552 standard, the CP96 profile and C96 tie-rod design cylinders are available in up to 125 mm bore with stocked standard strokes from 25 up to 800 mm in both designs. Non-standard strokes up to 2000 mm and made-to-order specials are locally manufactured in Australia.
Burkert 8791, 8792 and 8793 valve positioners
02 August, 2010A series of digital positioners that provide zero air bleed at rest position have been released.
Burkert 8791, 8792 and 8793 valve positioners
28 July, 2010A series of digital positioners that provide zero air bleed at rest position have been released.
Burkert SideControl 8791 valve positioner
17 June, 2010 byThe 8791 positioner is the basic version of the SideControl 8792 and 8793 positioners and is specially designed for ease of operation. The SideControl 8791 features the same pneumatic positioning system for control accuracy and dynamics.
SMC Pneumatics Series C55, double-acting, single-rod cylinders
21 April, 2010Series C55, double-acting, single-rod, air-operated cylinders offer high performance and ISO 21287 compliance.
SMC series MY3M rodless cylinder
08 April, 2010 byThe series MY3M from SMC is a space-saving, lightweight, mechanically jointed rodless cylinder with a high load capacity. Designed to complement the MY3 range, it features a slide bearing which improves both load weight and load movement performance.
Rotork CVA electric valve actuators
24 March, 2010The Rotork CVA range of electric actuator is designed to provide continuous, repeatable modulating control with a programmable fail-to-position option. Operating on a 4-20 mA control signal or digital bus, the resolution, repeatability and hysteresis performance of the CVA is quoted at <0.1% of full scale.
SMC Pneumatics MY3M rodless cylinder
16 February, 2010The MY3M rodless cylinder features a slide bearing that improves both load weight and load movement performance. With the ability to put work pieces directly onto the work table, the need to select and install external guides is no longer necessary, resulting in further time savings.
Tolomatic IMA integrated-motor electric actuator
14 January, 2010 byThe integrated-motor actuator (IMA) from Tolomatic combines a servo motor with Tolomatic’s rod-style actuator in a compact package. The IMA’s integrated design provides higher dynamic performance by eliminating the need for separate motors, couplers, motor mounts, gearing and belts. The result is reduced component costs, assembly time and failure points.
Pneumatic motors
10 November, 2009 byAssembly Technologies has introduced a range of high-torque stainless steel pneumatic motors from Deprag. These sealed motors offer starting torques of over 600 Nm with a maximum weight of 4.7 kg and a maximum diameter of 63 mm.
