Industrial relay
08 December, 2002 | Ohmic Controls Pty Ltd
The Restart Delay Relay from Comat AG has specific relevance for AC power circuits with downstream devices with stored energy or where restarts within the device thermal profile may damage equipment with potential for further downstream damage or loss of facility.
Alarm indicator
08 December, 2002 | Eurotherm Australia
The 2408i is a high specification process and temperature alarm indicator with an extensive range of I/O options. A modular hardware build accommodates a range of plug-in modules allowing for up to four alarm outputs, two process or load cell inputs, analogue retransmission, remote setpoint input and digital communications.
Digital test gauge
08 December, 2002 | Measurement Innovation Pty Ltd
The DTG-6000 from 3D Instruments, a 4½" digital test gauge addresses the calibration requirements of current process monitoring and control devices through pressure measurement technology.
Helical rotor units
25 October, 2002 | Roto Pumps Ltd
The Roto Pumps helical rotor positive displacement Xtra Value M series employs next generation improved geometry elements.
Inverter drives
24 October, 2002 | Baldor Australia Pty Ltd
The KB Genesis range of digital inverter drives is compact, easy to set up and provides a solution for variable speed control of motors up to 22 kW.
Colour piping
24 October, 2002 | Calair Pipe Systems Pty Ltd
CalAir Pipe Systems has evolved its Pro-Pipe II range of tough but lightweight piping systems that are permanently colour-coded to conform with the requirements of international standards relating to content identification of pipes, conduits and ducts, including AS1345 (1995) and ISO R508.
Pressure systems
24 October, 2002 | Dalco Controls
The PMS range of pressure maintenance control systems uses proven control technology to achieve a constant on-demand pressure in pumping systems.
QS30 laser sensors
24 October, 2002 | Micromax Pty Ltd
Banner Engineering has announced the World-Beam QS30 diffuse laser sensor range that features a visible laser beam for ease of alignment and long-range diffuse-mode sensing capabilities.
Scribe laser
24 October, 2002 | Markem-Imaje Pty Ltd
The Lightjet Vector is a laser coder with a nominal power of 100 W and a peak power of 200 W. Its mirror-deflected laser beam system codes at speeds of up to 300 m per minute or up to 1000 characters per second.
Fluid mechanics
24 October, 2002
Dantec Dynamics is launching a complete package for making Time Resolved PIV measurements. The package takes advantage of the new technology within high repetition rate laser and high frame rate CMOS came ras.
Burner control
24 October, 2002 | ECEFast
The BluePort range of burner controllers, supplied by PMA, provides control whereby modulating or sequential operation of conventional industrial burners is possible.
Gas watch
24 October, 2002 | Control Equipment Pty Ltd
The Personal Gas Watch GW Range is a single-gas monitor that can be worn as a wrist-watch or by accessory clip on the belt or shirt/jacket pocket. The range is a hands-free method of gas monitoring for personal protection of oxygen deficiency, carbon monoxide or hydrogen sulphide. The built-in vibrator, audible and visual alarms immediately alert the user of a dangerous gas condition.
Impact Cradles
24 September, 2002 | Kinder Australia Pty Ltd
Kinder has developed K-Sliderbed impact cradles for industries including: fertiliser; mineral concentrates; cement; and wood chipping, where high flow rates and deep drop points push conveyor supports to breaking point leading to product wastage.
2D and 3D Design
24 September, 2002 | Autodesk Australia
Autodesk has introduced the Inventor Series, a collection of 2D and 3D design applications that incorporates Autodesk Inventor 3D design software and Autodesk Mechanical Desktop, in one package. In addition, the package also features the functionality of AutoCAD and AutoCAD Mechanical software.
Level Indicator
24 September, 2002 | Metaval Engineering Sales
The SafePoint fail-safe rotary paddle bin level indicator utilises Monitor's magnetic sensing technology to continuously detect both material presence and operational status.
