Secure device servers
05 April, 2006 | Opengear
Opengear's secure device servers, comprising the SD4002 two-port unit and SD4008 eight-port unit, offer a high level of security together with an ability to control any device with an RS232/422/485 serial port or ethernet interface.
Demountable rotary valves with rotor detection system
05 April, 2006 | GEA Nu-Con Australia Pty Ltd
The use of plastic rotors in Nu-Con demountable rotary valves has proved to be a sound solution for eliminating metal contamination, which is a possibility with full stainless steel construction.
Magnetic separator
05 April, 2006 | Schenck Process Australia Pty Ltd
Schenck wet drum magnetic separators are designed for the recovery of magnetite or ferrosilicon from dilute media. These units use high-strength radial pole (HSRP)-type permanent magnets that are sandwiched between steel pole pieces, with an active angle of 136°.
VEGA bulk solids level measurement
06 March, 2006 | VEGA Australia Pty Ltd
Compromises in applications for continuous level measurement of bulk solids, such as dust, filling noise, mechanical loads and difficult installation conditions, hamper measuring or even make it impossible.
PH alarm and data logger
06 March, 2006 | H2O Rx
H2O Rx's pH alarm and data logger unit provides a simple solution for managers to control pH levels of trade wastewater from their commercial and industrial sites.
Barcode printer
06 March, 2006 | Peacock Bros Pty Ltd
The EasyCoder PC4 barcode label printer has a small footprint and is easy to operate.
Eurofast connector
06 March, 2006 | Veederline Pty Ltd
Turck has released an 8-pin M12 eurofast connector designed specifically for use with Kübler incremental encoders. These encoders are typically used in strenuous factory applications such as material handling, conveyors systems, process control and web control. The E-WKC 8T-PX3-930-* was designed to provide quick and easy connectivity in these demanding environments.
Pressure relief valves
06 March, 2006 | SMC Australia | New Zealand
The VHS pressure relief 3-port valve from SMC has been developed to isolate main air supply lines in almost any application where compressed air is used.
Programmable measurement controller
06 March, 2006 | A&D Australasia Pty Ltd
The A&D Mercury AD4820 is an HMI and PLC measurement and control system all rolled into one complete compact package. The instrument runs a 32 bit RISC processor and uses a real-time operating system, RT Linux. The AD4820 utilises a GUI front end known as virtual console (VC), together with a PLC ladder for controlling all I/O known as measurement and control ladder (MC).
SLVD servo drives
06 March, 2006 | Motion Solutions Pty Ltd
The SLVD (small, low voltage, digital) drives from Parker measure just 140 x 86 mm with a depth of 140 mm. The family includes models that can deliver shaft powers of up to 620 W.
Custom mass flow system
06 March, 2006 | AVT Services Pty Limited
AVT Services has commenced production of assemblies of components used in high accuracy delivery of gases for process and research applications.
Linear motion unit
05 March, 2006 | Robotunits Pty Ltd
Incorporating a wear-resistant hardened steel guide rail, the linear motion units from Robotunits have been designed for simplicity and flexibility. The steel rail is supplied fitted into an aluminium back plate that clips and aligns directly into the T slot of the Robotunits aluminium extrusion system. The automatic alignment feature means that the user no longer has to spend time setting up and adjusting the guide rails to achieve the alignment necessary for the application.
IMC-21 entry-level media converter
06 February, 2006 | CrispTech Pty Ltd
Crisp Technologies have recently launched an entry-level Industrial Media Converter IMC-21 series, which provides an economic solution for the Industrial Ethernet to fiber conversion. IMC-21 series consists of entry-level 10/100BaseT(X) to 100BaseFX and 10BaseT to 10BaseFL media converters that are specially designed for reliable and stable operation in harsh industrial environments, such as machine building, factory automation, and building automation.
Dumping station
06 February, 2006 | Flexicon Australia Pty Ltd
The manual dumping station with integral flexible screw conveyor collects dust created during manual dumping of powder and bulk solid materials from bags, boxes, drums and other containers.
Alarm module
06 February, 2006 | Dwyer Omega (Aust) Pty Ltd
The series DL-A logger alarm module works in tandem with Series DL data loggers and provides visual and audible indication that an alarm threshold has been triggered. The module remains in alarm state until the reset button is pressed. The Series DL-A is user configurable and includes two sets of relay contacts for general-purpose use. Use with a single data logger or with a network of data loggers.
