Fraba/Posital MCD heavy-duty stainless steel encoders
18 November, 2010 | Plant Control & Automation
The MCD heavy-duty absolute encoder from Fraba/Posital is based on the latest magnetic technology. The stainless steel housing with IP69K protection makes the encoder resistant to most chemicals and cleaning substances as well as high-pressure water jets. Combined with the sturdy ball bearings (for high shaft loads up to 300 N) this sensor is suitable for reliable measurement under extreme environmental conditions and outdoor applications.
Rockwell Software ERP Integration Gateway
18 November, 2010 | Rockwell Automation Australia
The Rockwell Software ERP Integration Gateway application is designed to allow plants to more easily and cost-effectively exchange transactions and execute business processes across the plant floor and business systems in real time.
Ohmart/VEGA FiberTrac 31 nuclear detector
16 November, 2010 | VEGA Australia Pty Ltd
The Ohmart/VEGA FiberTrac 31 is a nuclear detector with a flexible scintillator, designed to be used for level measurement. It is suitable for a wide variety of liquids, bulk solids, sludge and suspensions, due to its ability to accommodate vessel geometry.
Moxa EDS-P506A-4PoE, EDS-P206A-4PoE and INJ-24 PoE switches
04 November, 2010 | CrispTech Pty Ltd
Moxa has launched three high-power IEEE 802.3af/at PoE industrial ethernet switches aimed at power-hungry PoE-enabled devices such as PTZ cameras and long-distance wireless access points. The three models, the EDS-P506A-4PoE, EDS-P206A-4PoE and INJ-24, are designed to satisfy the demands of high-power devices by providing up to 30 W of power, double the amount in the existing IEEE 802.3af PoE standard.
National Instruments CompactRIO and Single-Board RIO vision systems
04 November, 2010 | National Instruments Aust Pty Ltd
National Instruments has announced the addition of machine vision capabilities to NI CompactRIO and NI Single-Board RIO hardware devices that provide engineers with an integrated measurement and control platform for industrial and embedded systems.
Acrodyne Acro-Matic pneumatic actuators and accessories
03 November, 2010 | Acrodyne Pty Ltd
Acro-Matic pneumatic actuators and accessories cover a range of torque outputs from 5 to 5000 Nm with a rack and pinion drive mechanism. The actuator is claimed to provide long and reliable service as the power pack.
Hydac Precare diesel engine filtration system
03 November, 2010 | HYDAC International
The Hydac Precare diesel filtration system protects vehicle manufacturers and operators from failures, breakdowns and service interventions. Two versions of the cartridge filter system are available - manual water discharge and fully automatic discharge.
Vanton Sump-Gard model SGK PY800SP sump pump
01 November, 2010 | Acromet (Aust) Pty Ltd
The Sump-Gard model SGK PY800SP thermoplastic pump from Vanton features a close-coupled, cantilevered shaft that reduces headroom requirements and eliminates immersed bearings.
Gates Quad-Power III notched raw- edge narrow section V-belts
01 November, 2010 | Gates Australia Pty Ltd
Gates Quad-Power III is a range of notched raw-edge narrow section V-belts, designed to deliver higher power ratings, increased trouble-free service life and reduced energy consumption.
Watson-Marlow 520Bp, 620Bp and 720Bp Profibus-enabled pumps
01 November, 2010 | Watson-Marlow Fluid Technology Group
Watson-Marlow Pumps has launched three IP66-rated peristaltic pumps with certified Profibus DP networking capabilities, the 520Bp, 620Bp and 720Bp.
Exair Super Air Wipe
01 November, 2010 | Compressed Air Australia Pty Ltd
The Super Air Wipe from Exair produces a 360° airstream that can blowoff, dry, clean or cool the material passing through it. The split design can be clamped around continuously moving material such as wire, cable, pipe, hose and extruded shapes.
Beck drives electric actuators
01 November, 2010 | Acrodyne Pty Ltd
Beck drives are designed electric actuators that offer consistent, precise control without the performance and maintenance limitations of typical actuators. Unlike pneumatic and conventional electric actuators, the drives can withstand continuous duty modulation without degradation of performance. The electric actuators combine the positioning necessary for optimum control with the reliability to keep the process running.
ITT Lowara e-SV stainless steel, vertical multistage pumps
01 November, 2010 | Xylem Applied Water Systems Australia Pty Ltd
Lowara e-SV stainless steel, vertical multistage pumps are claimed to feature innovative hydraulic design and efficiency characteristics that significantly lower life-cycle costs, with increased energy savings and are suited for a wide variety of commercial and industrial applications.
Firestone 70-P-13 Airomatic polyactuators
01 November, 2010 | Air Springs Supply Pty Ltd
Tiny but robust pneumatic actuators are available from Air Springs that stand 16 mm high deflated and have a stroke of more than 12.5 mm.
Nexen RB series, Generation II linear profile guide rail brakes
29 October, 2010 | Norman G Clark Pty Ltd
Nexen Group has announced the RB series, Generation II linear profile guide rail brakes for stopping and holding in e-stop and power-off situations. The brakes deliver a high spring-engaged/air-released holding force, providing secure holding and fast response time for a broad range of linear motion control applications.
