Nexen RPS stainless steel roller pinion racks
23 July, 2013 | Norman G Clark Pty LtdNexen Group has expanded its roller pinion system (RPS) by adding a full line of racks made of precipitation hardened stainless steel.
Aaeon AFP-6152 all-in-one computer
22 July, 2013 | Interworld Electronics and Computer IndustriesThe Aaeon AFP-6152 all-in-one computer is housed in a fanless, fully sealed stainless steel case that provides IP66 protection front, back and sides, as well as waterproof I/O connectors.
Phoenix Contact PT Power 95 high current terminals
22 July, 2013 | Phoenix Contact Pty LtdThe PT Power 95 high current terminals from Phoenix Contact make it possible to easily connect and wire rigid or flexible ferruled conductors up to 95 mm² directly and without the need for tools.
Rosemount 3308 wireless guided wave radar transmitter
19 July, 2013 | EmersonThe Rosemount 3308 is a WirelessHART guided wave radar (GWR) transmitter for continuous level and interface monitoring, deigned for level monitoring in remote or difficult-to-reach locations where installing new cabling would be costly or impractical.
Moxa ioLogik R1200 series RS485 serial interface I/O devices
19 July, 2013 | Madison TechnologiesThe ioLogik R1200 smart RS485 serial remote I/O devices are designed for establishing a cost-effective, dependable and easy-to-maintain process control remote I/O system.
Phoenix Contact M17, M23 and M40 round-plug connectors
18 July, 2013 | Phoenix Contact Pty LtdThe addition of M17, M23 and M40 round-plug connectors to the Phoenix Contact range means a full range of plug connectors from M5 to M58 are now available for signal, data and power transmission.
ABB Automation Builder development software suite
18 July, 2013 | ABB Australia Pty LtdABB’s Automation Builder provides an integrated development environment for control and motion systems based on PLCs, safety PLCs, robotics, motion control and related automation components.
Druck DPI 615-20-NATA 20 bar pneumatic pressure calibrator
17 July, 2013 | TechRentalsThe DPI 615-20-NATA 20 bar pneumatic pressure calibrator is a self-contained, battery-operated instrument that contains a pressure generator, fine pressure control, and device energising and output measurement capabilities. The device is available to rent.
Aaeon AEC-6637 embedded controller
17 July, 2013 | Interworld Electronics and Computer IndustriesThe Aaeon AEC-6637 Intel Core i7/i3-based embedded controller is a high-performance, stand-alone embedded PC featuring fanless operation, compact size, robust construction and low power requirements.
Krohne SMARTSENS 2-wire loop-powered analytical sensors
16 July, 2013 | KROHNE Australia Pty LtdSMARTSENS sensors significantly reduce the risk of failures along the chain from sensor to process control system and ease the handling of analytical sensors, by integrating a loop-powered transmitter directly in the sensor head.
IMI Sensors Model 685A09 linear adjust mechanical vibration switch
15 July, 2013IMI Sensors’ Model 685A09 linear adjust mechanical vibration switch features an improved design that provides a better sensitivity adjustment than previously.
Michell Instruments PCR portable calibration rig for gas analysers
15 July, 2013 | AMS Instrumentation & Calibration Pty LtdThe PCR portable calibration rig is a mobile gas blender using premium mass flow controllers housed in a tough transport case that can be used for gas analyser calibration with a large variety of applications and analysers.
Phoenix Contact FL View network monitoring and diagnostics software
12 July, 2013 | Phoenix Contact Pty LtdFL View is monitoring and diagnostics software that visualises the network topology and constantly monitors the network performance of all ethernet and WLAN devices.
Haydon Kerk sealed switches
12 July, 2013 | Motion Technologies Pty LtdHaydon Kerk sealed switches are filled with dry nitrogen and are variously rated for temperatures between -55 and +400°C
SG Transmission Series 62 fail-safe electromagnetic brakes
11 July, 2013 | Automated Motion Systems Pty LtdThe SG Transmission 62 fail-safe electromagnetic brakes are suitable for improving safety on machines using stepper and servo motors with heavy vertical loads. If the power fails, the brake locks and the load is prevented from falling.
