PLC software
01 December, 2008Galil Motion Control has released Ladder Interface Software for converting Relay Ladder Logic programs into optimised, deterministic code for its compact RIO-471x0 PLC.
CJ2H PLC CPU
01 December, 2008Omron Electronics has released the CJ2H PLC CPU. Using all the existing CJ1 cards and power supplies, the CJ2H allows users access to improvements in performance and technology while maintaining backward compatibility.
Wind power PLC library
01 December, 2008Beckhoff has announced a PLC library for its automation suite, TwinCAT PLC IEC 61400-25. The IEC 61400-25 standard defines communication for monitoring and controlling wind turbines. Its integration in TwinCAT is designed to simplify the control of heterogeneous wind farms.
PLC scope software
01 December, 2008Graphic display of curves is essential for optimising controllers and setting drive axes.
Integrated automation software
01 December, 2008Omron Electronics has released version 3 of CX-One. Running on Windows Vista and built-in Omron’s SmartPlatform technology, CX-One programs nearly all of Omron’s industrial components, including the latest PLCs, HMIs, networks, VSDs, servos and temperature controllers.
Valve automation package
01 December, 2008The ATEX-certified Jamesbury Cintac advanced automation package for rotary valves comes in a compact, rugged design.
Aussies as good as gold in Laos
20 November, 2008Australian expertise has been showcased in the development of the Phu Kham Copper-Gold Operation in Laos. PanAust Limited, which has a 90% stake in the operation, appointed Brisbane-based Ausenco Limited to design and engineer the project on an engineering, procurement and construction management (EPCM) basis.
Small to midrange system controller
01 November, 2008The AC 700F controller is designed to close the gap between generic PLCs and complex process control systems.
RTU for hazardous areas
01 November, 2008The Kingfisher G30 RTU has successfully completed the MET certification process for safety standards UL 1604, Electrical Equipment for Use in Class I and Class II, Division 2, and Class III Hazardous (Classified) Locations; and CSA 22.2 No. 213-M1987, Non-Incendive Electrical Equipment for Use in Class I, Division 2 Hazardous Locations.
Compact Modbus RTU master
01 November, 2008The microNCS Modbus RTU master and distributed I/O system can be used to send just a few, or hundreds of, process signals between the field or factory floor and a control system.
Programmable dispensing system
01 November, 2008The PDS-100 from Fluid Metering Inc is a programmable dispensing system which uses precision stepper motors to control a variety of FMI’s valveless piston pumps.
Programmable logic controller
01 November, 2008The Click PLC is the first of a range of inexpensive PLC components designed to offer practical features in an easy-to-use, compact yet expandable design. This line of micro-brick PLCs with stackable I/O modules and free programming software is suitable for first-time users as well as experienced programmers.
ALD control system
01 November, 2008The AVT ALD system enables automation of an atomic layer deposition (ALD) process. It is a PC-based control system that is supplied with electronic hardware that is integrated with any existing ALD equipment for full automation of its process.
Micro PLC
20 October, 2008Panasonic has released six add-on cassettes for the micro PLC, the FP-X. There are now 16 I/O and communication cassette options available, the highlight being an ethernet communications cassette.
Intelligent batch controller
05 October, 2008The IBC is an intelligent batch controller for liquids with an 8-digit 14 mm character height LED display. All functions of the instrument are programmable from the front panel by touch buttons with tactile feedback. Variables are stored in EEPROM non-volatile memory.
