Failsafe level alarm relay and probe
11 May, 2009 | Supplied by: Multitrode Pty Ltd
MultiTrode has released the SafeSmart level alarm relay and failsafe probe that provides an additional failsafe detection.
Wireless and ethernet data acquisition modules
20 April, 2009 | Supplied by: http://www.ni.com/dataacquisition/wifi/
National Instruments has announced six wireless and ethernet data acquisition modules and two ingress protection (IP) enclosures for remote monitoring and control in harsh environments.
Analogue data acquisition modules
20 April, 2009 | Supplied by: http://www.ieci.com.au/products/nav.asp?Class=4&BaseCat1=32
Interworld Electronics supplies a range of multi-function analogue I/O and analogue output boards and modules. Analogue data acquisition is available for almost any computer that supports PCI, PC/104, PC/104 Plus or USB bus connections.
Radiometric measurement — at home in extreme process conditions
06 April, 2009 by Simon Rigling* | Supplied by: Endress+Hauser Australia Pty Ltd
Radiometric measurement, also known as nuclear- or gamma-based measurement, is an extremely reliable and safe, non-invasive solution that is suitable for level limit detection, continuous level measurement, and density and interface layer measurement.
Temperature switch with rotating set-up dials
01 April, 2009 | Supplied by: ifm efector pty ltd
The compact TK series switch and its 316 stainless steel RTD probe measure only 72 mm and the probe is directly mounted into a pipe. Two mechanical set-up dials rotate to quickly establish the setpoint and resetpoint temperatures. The switch’s high accuracy ensures that the setpoint does not drift and calibration is not required.
Thermal dispersion gas flowmeter
01 April, 2009 | Supplied by: Endress+Hauser Australia Pty Ltd
The Proline t-mass 65 thermal dispersion flowmeter provides a direct measurement of gas mass flow and temperature.
Panel mount rate and total display
01 April, 2009 | Supplied by: Amalgamated Instrument Co
The PM6-TR is a ratemeter/totaliser and supersedes both the PM6-FX and PM6-FC models. This single 1/8 DIN panel meter offers the ability to monitor and indicate rate and count (or total) from a wide variety of pulse output sensors. The display can be toggled between rate and total using a remote input.
Compact orifice DP flowmeters
01 April, 2009 | Supplied by: ABB Australia Pty Ltd
The OriMaster compact orifice DP flowmeter is a one-piece flowmeter that comes fully factory configured and pressure tested, solving many of the problems associated with sizing, selection, installation and operation of conventional orifice plate installations.
Pressure transducers
01 April, 2009 | Supplied by: AMS Instrumentation & Calibration Pty Ltd
Noshok’s 300 series compact-sized pressure transducer delivers long-term stability during operation and is suitable for use in general industrial applications where space is limited and durability is essential.
Digital displays
01 April, 2009 | Supplied by: Burkert Fluid Control Systems
Bürkert has released a range of digital displays with indicator, totaliser and counter functionality, as part of the eLine range of electronic devices.
BCM load cells
01 April, 2009 | Supplied by: Bestech Australia Pty Ltd
The model 3417/3497 single-ended shear beam load cells from BCM Sensors are low-profile, high-precision load cells based on the shear-beam working principle. These load cells can find applications in hopper scales and platform scales, or can be used to measure beam bending loads.
Oil-in-water measurement
01 April, 2009 | Supplied by: Environmental & Process Technologies
Enviro-Flu-HC is a new generation of highly sensitive submersible sensors for oil-in-water measurement. The UV fluorescence principle used for detection is claimed to be more sensitive than other existing detection principles, such as infrared scattering.
Inline water quality monitoring in distribution pipelines
01 April, 2009 | Supplied by: Westwater Enterprises
The Intellisonde multi-parameter monitoring system is a measuring device designed for direct insertion into potable water pipeline distribution networks, providing benefits including: continuous water quality monitoring within the distribution system; integration into a water utility data collection system such as SCADA; providing real-time and historical data — both alphanumeric and graphical; assistance with compliance and regulatory requirements; analysis of the distribution network; and minimising risk of contamination posed by bursts and repairs.
Burkert Fluid Control Systems sanitary mag flowmeter
01 April, 2009 | Supplied by: Burkert Fluid Control Systems
Dedicated to process applications that do not require local push-button programming or display, the blind Type 8056 sanitary mag flowmeter delivers high accuracy over a wide flow velocity range. The Type 8056 is engineered for fast filling applications with short reaction time, high-speed sampling (short sampling/measurement time) and high-speed frequency output, making it suitable for filling systems.
Amalgamated Instrument differential pressure transmitter
01 April, 2009 | Supplied by: Amalgamated Instrument Co
The WS-TPDPT7 transmitters are available in three models with selectable ranges. The high accuracy model measures ranges from 0-25 Pa to 0-100 Pa in four selectable ranges, the standard model measures ranges from 0-50 Pa to 0-2500 Pa in eight selectable ranges and the high-pressure model measures ranges from 0-5000 Pa to 0-10000 Pa in six selectable ranges.
