Graphtec midi LOGGER GL220
18 October, 2010 byThe Graphtec midi logger GL220 has ten isolated channels with multifunction inputs. The isolated input system ensures that signals are not interfered with by sensors connected to other channels. It can be used to capture voltage, temperature, humidity and pulse as well as logic signals.
Datapaq Food Tracker profiling system
17 September, 2010 byThe Food Tracker profiling system from Datapaq is a multi-channel method of measuring the actual product and ambient temperature throughout any cook/fry/chill processes.
Shepelec EnergE portable 60-channel data acquisition system
23 August, 2010 byThe EnergE is a rugged, portable, 60-channel data acquisition system designed to be a portable recording and display system for analysis and fault-finding in all plant processes. The EnergE can be configured to accept any combination of input including Modbus, digital and analog. This allows recording of parameters such as power, compressed air, temperature, flow and level, as well as setpoints, process variables and current state of controlled objects.
National Instruments CompactDAQ modular data acquisition system
12 August, 2010The ethernet-based NI CompactDAQ modular data acquisition system is designed to combine the ease of use and low cost of a data logger with the performance and flexibility of modular instrumentation. The NI cDAQ-9188 chassis is designed to hold eight I/O modules for measuring up to 256 channels of electrical, physical, mechanical or acoustic signals in a small (25 x 9 x 9 cm), rugged form factor. With more than 50 different hot-swappable I/O modules to choose from, engineers and scientists can build high-speed measurement systems using standard gigabit ethernet infrastructure. In addition, NI CompactDAQ offers simplified initial set-up with zero configuration networking technology and a built-in, web-based configuration and monitoring utility.
Astro-Med TMX high-speed data acquisition system
22 June, 2010 byAstro-Med has introduced the TMX high-speed data acquisition system, offering general-purpose data capture, review, archive and analysis. It features 96 channels of data recording to a 1 TB hard drive dedicated solely to data capture, allowing for data to be recorded for many months in a single file.
National Instruments SC Express family PXI DAQ modules
09 June, 2010 byNational Instruments has announced the company’s first data acquisition (DAQ) modules with integrated signal conditioning on PXI Express. The SC Express family offers increased accuracy, high data throughput and synchronisation for measuring strain gauges, bridge-based transducers, thermocouples and high-voltage analog inputs. PXI Express provides 250 MBps of dedicated bandwidth for each SC Express module in the chassis.
What you really need to know about sample rate
07 June, 2010 by Roger W Lockhart, DATAQ InstrumentsBy and large, discussions of sample rate are like watching paint dry. Do we really have to get into the details? After all, everyone knows that you only need to sample at twice the frequency of your signal of interest to get good results, right? If you answered “right!” to that last statement, perhaps you should read on.
Redpost RPU-353 pasteurisation temperature recorder
06 May, 2010 byThe RPU-353 is a special-purpose electronic temperature recorder designed to monitor the tunnel pasteurisation process. It has inputs for two temperature probes for monitoring spray water and product temperature together with package internal pressure.
Redpost RPU-352 pasteurisation temperature recorder
06 May, 2010 byThe RPU-352 is a special-purpose electronic temperature recorder designed to monitor the tunnel pasteurisation process. It has inputs for two temperature probes so that the conditions inside and outside the package can be measured at the same time.
Endress+Hauser Memograph M CVM40 optical measurement recorder
21 April, 2010Endress+Hauser’s Memograph M CVM40 optical measurement recorder provides continuous measurement of UV absorption, colour, NIR absorption, turbidity and cell growth, as well as recording other relevant process values such as flow, pressure and temperature.
Amalgamated Instruments TP488 scanning monitors
20 April, 2010 byThe TP488 range of scanning monitors offers eight channels of input with eight configurable setpoint relays. These products are suitable for multipoint monitoring of analog transducers or temperature sensors.
Dwyer Series ISDL temperature/humidity data logger
20 April, 2010 byDwyer Instruments has released of its Series ISDL temperature/humidity data logger.
Unidata 6526 open channel liquid flow logger
14 April, 2010The Unidata 6526 open channel liquid flow logger is a compact, easy-to-use system for measuring the velocity and depth of water in rivers and streams, open drainage channels and large pipes. It is now available for rent.
Interworld Electronics USB-AI16-64M series high-density analog input modules
28 February, 2010The USB-AI16-64MA is a 64-channel, 16-bit resolution 500 kHz analog input module that includes 12 digital I/O lines.
Unidata 6526 open channel liquid flow logger
28 February, 2010The Unidata 6526 open channel liquid flow logger is a compact, easy-to-use system for measuring the velocity and depth of water in rivers and streams, open drainage channels and large pipes. It is now available for rent.
