HMS 1 SI CANopen module for Simatic ET200S
17 September, 2010 byHMS has extended the functionality of its 1 SI CANopen module for the Simatic ET200S I/O system with the integration of the CAN 2.0A protocol. In addition to the standard CANopen protocol, the HMS 1 SI CANopen module can also be used for transmission/ reception of any CAN 2.0A frame regardless of the overlaying CAN application protocol. The extended functionality maximises usability and flexibility of the CAN gateway. Typical applications include all kinds of machines and automation systems where CAN- or CANopen-enabled devices are used in combination with Siemens PLCs.
Fieldbus Foundation announces final release of ITK 6.0
16 September, 2010Latest test kit has been updated to test for new, required field diagnostics capabilities.
Signal isolators, converters and interfaces - Part 1
10 September, 2010By using the right signal interface instruments, in the right ways, potential problems can be easily avoided well before they boil over.
FOUNDATION Fieldbus specification updated
23 August, 2010The Fieldbus Foundation has announced that an updated version of its FOUNDATION Fieldbus technical specification is now available.
National Instruments CompactRIO PROFIBUS C Series modules
17 June, 2010 byInterfaces for PROFIBUS, FOUNDATION Fieldbus and DeviceNet that make it possible for engineers to connect LabVIEW, programmable automation controllers (PACs) and embedded systems to their existing industrial networks have been announced.
ODVA releases new specifications
03 June, 2010The Open DeviceNet Vendors Association (ODVA) has published new editions of the specifications for ODVA networks.
Siemens Simatic ET 200S PM-E RO power module and function blocks
20 April, 2010 bySiemens has launched its first Profienergy products: the Simatic ET 200S PM-E RO power module for the Simatic ET 200S High Feature distributed I/O system, and function blocks for Simatic controllers. The power module specifically switches off individual inputs and outputs of the Simatic ET 200S High Feature I/O system and disconnects their connected loads from the power supply.
Turck PB-XEPI Ethernet/Profibus device coupler
20 April, 2010 byThe PB-XEPI Ethernet/Profibus device coupler combines integrated web server software with diagnostic functionality, to enable users to monitor Profibus networks remotely through a web browser, without disrupting network operations. The PB-XEPI may be integrated into new or existing Profibus networks in pharmaceutical, food and beverage, and packaging applications.
Turck single-segment redundant backplane
10 March, 2010 byTurck has expanded its diagnostic power conditioner system with a single-segment redundant backplane that can combine two isolated power supply modules into one FOUNDATION fieldbus segment. The backplane includes an integrated diagnostic unit used to monitor the redundancy of the external bulk power supply along with the H1 power supply - aiding in the availability of the H1 segment. System status is available via a relay contact.
Honeywell joins field device integration cooperation
25 February, 2010FDI Specification can help lower total cost of ownership of digital field devices.
Fieldbus Foundation updates test kit
08 December, 2009The Fieldbus Foundation has announced an updated Host Test Kit DD Application Module.
Fieldbus Foundation establishes Australian marketing committee
30 November, 2009The Fieldbus Foundation has announced the establishment of the Fieldbus Foundation Australian Marketing Committee (FF AMC).
Fieldbus Foundation registers first FOUNDATION H1 device couplers
11 November, 2009MooreHawke and Pepperl+Fuchs are the first FOUNDATION fieldbus device coupler suppliers to pass the FOUNDATION fieldbus H1 registration process.
Fieldbus power supply
26 October, 2009 byMooreHawke has introduced the Trunkguard TPS400 fieldbus power supply for general-purpose and non-incendive applications.
Wang Components takes the integrated way with Profibus
12 October, 2009Set up in 1963, Victorian-based Wang Components was initially involved in the water pumping and irrigation business before moving into the manufacture of quality clamps and couplings. Over the past few years, the company was able to use the features of Profibus to implement a creative automation plan.
