Moore Industries HIX HART loop isolator
23 August, 2011The HIX HART loop isolator provides loop isolation while allowing the HART signal to pass through uninterrupted.
Boxer series BMM-101 single-port Modbus serial to TCP gateway
16 August, 2011 byThe Boxer series BMM-101 is a single-port Modbus gateway designed to integrate legacy Modbus ASCII/RTU serial devices into a Modbus TCP (ethernet) system. BMM-101 gateways support 10/100 Mbps ethernet and RS232/422/485 serial signalling. Both LAN and WAN communications are supported.
Beckhoff EL6631-0010 Profinet terminal for EtherCAT
19 July, 2011 byBeckhoff is expanding its product range for the EtherCAT I/O system with the EL6631-0010 Profinet terminal which, as a gateway from EtherCAT to Profinet RT, connects two real-time ethernet bus systems with one another.
Pepperl+Fuchs intrinsically safe transmitter power supplies
07 July, 2011 byPepperl+Fuchs has released four transmitter power supplies for intrinsically safe applications up to SIL3. The transmitter power supplies for the K- and H-Systems have each been extended to include two additional modules that are designed for intrinsically safe applications up to SIL 3 according to EN61508. The advantage of these supplies is that only a single transmitter is required to construct an intrinsically safe signal circuit for SIL 3. Previously for SIL 3 this was only possible using two separate inputs, both of which had to be monitored for redundancy reasons. Internal diagnostic functions are also signalled via a single output and red LED, and prescribed test intervals can be extended for SIL 2 applications.
MooreHawke Trunksafe Fault-Tolerant Fieldbus System
29 June, 2011The Trunksafe Fault-Tolerant Fieldbus System from MooreHawke protects against single points of failure.
Moore Industries HIM HART loop interface and monitor
28 April, 2011The HIM HART loop interface and monitor helps to unlock the full potential of new and in-place smart HART multivariable transmitters and valves by allowing trusted smart devices to be left in place, while still taking advantage of the additional information they can provide.
Distributed I/O improves water treatment plant
03 April, 2011In central New York State, recent upgrades at a municipal water plant have provided the means for operators to enhance their process for meeting the water quality needs of customers.
Balluff IO-Link analog plugs
21 March, 2011 byIn most typical industrial I/O applications, 90% of the I/O count is discrete, leaving 10% of the I/O as analog. Most engineers have cost-effective means to gather their discrete I/O, but the analog points add a level of difficulty.
Belden 0910 ASL 146 and 0910 ASL 438 AS-Interface modules
21 March, 2011 byBelden has extended its Lumberg Automation products to include two new actuator/sensor interface (AS-Interface) modules with encapsulated PUR housing and high signal density.
Pepperl+Fuchs intrinsically safe FieldConnex components
21 March, 2011 byFieldConnex components for PROFIBUS PA and Foundation Fieldbus H1 that make the high-power trunk intrinsically safe are now available. DART fieldbus power supplies and DART segment protectors are suitable for hazardous area Zone 1. DART power enables long I.S. trunk cables at up to 1000 m and to connect existinhg I.S. fieldbus devices on I.S. spurs up to 120 m long, thus meeting the total segment length of 1900 m.
Honeywell Field Device Configurator (FDC) application for MCToolkit
01 March, 2011 byThe Field Device Configurator (FDC) software application for the MCToolkit handheld configurator device allows operators to more easily configure and assess the health of HART 5, 6 and 7 instrumentation.
First FOUNDATION registered devices with Advanced Field Diagnotics
08 November, 2010The Fieldbus Foundation has announced it has registered the first FOUNDATION Fieldbus devices incorporating advanced field diagnostics technology.
Turck JBBS junction bricks for AS-interface networks
14 October, 2010 byTurck’s JBBS junction bricks for AS-interface networks are now FM approved for Class I, Division 2, Groups A, B, C and D hazardous locations. JBBS junction bricks simplify the connection of multiple field devices and can be mounted directly on the machine in hazardous environments, with no enclosure required.
Signal isolators, converters and interfaces - Part 2
11 October, 2010By using the right signal interface instruments, in the right ways, potential problems can be easily avoided, well before they boil over.
Vega Vegascan 693 universal signal conditioning instrument
23 September, 2010 byVegascan 693 is a universal signal conditioning instrument for level and process pressure measurements. Besides providing signal connections for up to 15 HART sensors, it enables simple set up and commissioning of the sensors from the switch room.
