Products

AccuStar electronic inclinometer

13 March, 2009 | Applied Measurement Australia

Available in a range of ±60°, the AccuStar electronic inclinometer is an accurate angle measurement device. The compact and rugged sensor is suitable where space is critical and environmental conditions are serious design concerns.

19-pin connectors

13 March, 2009 | Turck Australia Pty Ltd

Turck has expanded its 28.6 mm minifast connector line with the addition of the 19-pin connector. The 19-pin minifast connector is rated for up to 300 V, 4 A per pin, and is a solution for applications requiring an even more robust, cost-effective solution than a traditional 19-pin M23 connector — including material handling in manufacturing and packaging applications.

Wireless keyboard

13 March, 2009 | APC Technology

APC Technology has announced the redesign of the DW-860 rugged wireless keyboard into a sleeker, more compact case with no protruding battery pack. The case enables the keyboard to be more convenient for mobile and wireless users.

AccuStar inclinometer

13 March, 2009 | Applied Measurement Australia

Available in a range of ±60°, the AccuStar electronic inclinometer is an accurate angle measurement device. The compact and rugged sensor is suitable where space is critical and environmental conditions are serious design concerns.

Profibus-DP bus interface module

13 March, 2009 | GE Intelligent Platforms

GE Fanuc Intelligent Platforms has announced the availability of a Profibus-DP bus interface module for its 8000 line of general purpose and intrinsically safe I/O.

Wafer-Atom single-board computer

13 March, 2009 | ICP Electronics Australia

The Wafer-Atom is a 3.5" single-board computer that incorporates the low-power 1.6 GHz N270 Atom processor. In conjunction with the 945GSE system chip set, the board provides a balance between high performance and low power consumption (15 W with 1 GB DDR2).

Robotic palletising and LGVs

13 March, 2009 | Hot Melt Packing Systems

The Euroimpianti Skilled ANT101 is a simple palletising robot. It has a modular construction and can be adapted to any pre-existing product conveyor and packaging line. The fully automatic, compact line dedicated palletisers remove the need for conveying to a centralised palletising area and enable independence of production lines. The Cartesian structured robot with four degrees of freedom houses one or two palletising stations and one pick-up conveyor. Its pick-up station conveyor has sloping rollers in order to guide and centre the cases before pick-and-place palletising. The adjustable pick-up gripper of mechanical or venturi vacuum style equipped with an anti-collision safety device provides the most flexible and reliable pick-and-place operation.

Noise monitor

13 March, 2009 | Acoustic Research Laboratories Pty Ltd

Acoustic Research Laboratories has released the Ngara noise monitor. Ngara is a real-time sound acquisition system that offers class 1 specifications, allowing the user to post-process statistical noise measurements from 1/10th of a second stored data files. Ngara provides the option to store calibrated (continual or triggered) 48 kHz raw audio data. Measurements and data are stored to a USB storage device (HDD or memory stick).

Swagelok flowmeters

12 March, 2009 | Swagelok

Swagelok variable area flowmeters (VAFs) are used to measure liquid and gas flow rates by means of a tapered tube and float, and provide highly accurate measurement with individually calibrated scales and a 10:1 turndown ratio. All Swagelok VAFs are factory calibrated and marked to indicate the specific media, flow range, and accuracy class. In addition, the product can be calibrated and marked to customer-specific applications.

PLCOpen-certified PAC platform

12 March, 2009 | GE Intelligent Platforms

GE Fanuc Intelligent Platforms has announced that it has received certificates of compliance from PLCopen, the independent organisation that focuses on the harmonisation of control programming around IEC 61131-2. PLCopen represents various industries and seeks to drive more efficiency in industrial automation through creating specifications and implementations in engineering programming language. GE Fanuc Intelligent Platforms fulfilled the requirements of the PLCopen Compliance Procedure for Motion Control Library V. 1.1 and PLCopen Compliance Procedure for Motion Control Part 2 — Extensions, Version 1.0.

Mobility solution for SCADA

12 March, 2009 | Schneider Electric

Schneider Electric has extended its mobility solutions to allow operational and management personnel to monitor their factories, plants and mining sites from any location. These solutions enhance the capabilities of a SCADA network by providing access via a greater range of mobile devices.

Draw-wire sensor

12 March, 2009 | Bestech Australia Pty Ltd

The MK120 from measurement technology manufacturer Micro-Epsilon, Germany, is an OEM low-cost draw-wire sensor and offers a measuring range of up to 7.5 m.

Backplane Systems ERS800-D16 fanless waterproof computer

12 March, 2009 | Backplane Systems Technology Pty Ltd

Backplane Systems has announced the ERS800-D16, a slim, fanless, waterproof system based on iBase’s ECX800E-D16 single board computer.

Hybrid Profinet cable

12 March, 2009 | HARTING Pty Ltd

The Harting Technology Group’s hybrid Profinet cables combine Profinet data and 24 V power distribution in a single cable, making installation easier and faster. The hybrid cable is suitable for use with the Harting Profinet Han 3A RJ45 connector family.

Fanless panel PCs

12 March, 2009 | Interworld Electronics and Computer Industries

Interworld Electronics has released the APC-3x16 series all-in-one fanless panel PCs. The APC-3x16 series are sealed to NEMA 4/IP65 specifications on five sides to provide protection from dust and liquid contaminates.

  • All content Copyright © 2025 Westwick-Farrow Pty Ltd