Electro-Chemical Devices CA-6 UV spectroscopic analysers
29 April, 2016 | AMS Instrumentation & Calibration Pty LtdThe CA-6 UV range of spectroscopic analysers from Electro-Chemical Devices (ECD) can monitor any two selected parameters in separate measurement ranges for ammonia, nitrate or chemical oxygen demand (COD 254 nm).
Michell Instruments HygroSmart HS3 interchangeable relative humidity probe
22 March, 2016 | AMS Instrumentation & Calibration Pty LtdThe HygroSmart HS3 interchangeable relative humidity and temperature probe from Michell Instruments is 100% configurable to allow maximum flexibility to the user.
Electro-Chemical Devices HCA1 Portable Colorimetric Chlorine Test Kit
02 March, 2016 | AMS Instrumentation & Calibration Pty LtdThe HCA1 Portable Colorimetric Chlorine Test Kit is suitable for testing free and total chlorine in drinking water, wastewater, environmental waters, cooling towers and rinse waters in the food and beverage industry.
Michell Instruments HygroCal100 humidity verifier
15 February, 2016 | AMS Instrumentation & Calibration Pty LtdThe HygroCal100 humidity verifier provides a practical option for companies that are not able to invest in a full humidity calibration laboratory to verify their humidity probes in-house.
Michell Instruments ES20 sampling system with Easidew PRO XP dewpoint transmitter
02 February, 2016 | AMS Instrumentation & Calibration Pty LtdThe ES20 compact sampling system from Michell Instruments now has the option of an Easidew PRO XP dewpoint transmitter.
Electro-Chemical Devices HCA1 Portable Colorimetric Chlorine Test Kit
27 January, 2016 | AMS Instrumentation & Calibration Pty LtdThe HCA1 Portable Colorimetric Chlorine Test Kit is suitable for testing free and total chlorine in drinking water, wastewater, environmental waters, cooling towers and rinse waters in the food and beverage industry.
Michell Instruments HygroCal100 verification system for humidity probes
25 November, 2015 | AMS Instrumentation & Calibration Pty LtdWeighing just 3.2 kg and with a battery life of up to 8 h, the HygroCal100 verification system for humidity probes is designed with portability in mind.
Michell Instruments S8000 Integrale chilled mirror hygrometer
04 November, 2015 | AMS Instrumentation & Calibration Pty LtdMichell Instruments has redesigned its S8000 Integrale chilled mirror hygrometer to take advantage of improvements in technology since its introduction in 2007.
Michell Instruments XTP601 and XTC601 gas analyser upgrade kits
28 October, 2015 | AMS Instrumentation & Calibration Pty LtdMichell Instruments has released four kits that will enable users to upgrade existing general-purpose XTP601 oxygen and XTC601 binary gas transmitters into fully functioning analysers.
Michell Instruments QMA601 process moisture analyser
21 October, 2015 | AMS Instrumentation & Calibration Pty LtdThe QMA601 is installed as a self-contained analyser or sampling system package within hazardous areas and is easy to retrofit to an existing site.
Process Control UNIFLOW-200 flow computer
15 October, 2015 | AMS Instrumentation & Calibration Pty LtdThe UNIFLOW-200 flow computer can measure eight fluid streams simultaneously so that it replaces eight single-stream flow computers in one case.
ECD FC80 free chlorine analyser
12 October, 2015 | AMS Instrumentation & Calibration Pty LtdThe ECD FC80 free chlorine analyser is a panel-mounted, ready-to-use analyser that requires no reagent.
Michell I7000XP Hygrosmart relative humidity and temperature sensor
16 September, 2015 | AMS Instrumentation & Calibration Pty LtdMichell Instruments has launched an improved version of its interchangeable relative humidity sensor — the HygroSmart I7000XP — which enables users to carry out maintenance on industrial relative humidity and temperature transmitters in as few as 30 s.
Michell XZR400 series oxygen analyser for cryogenic air separation
03 September, 2015 | AMS Instrumentation & Calibration Pty LtdCryogenic air separation is used to produce high-purity oxygen, nitrogen, argon and carbon dioxide, and highly accurate oxygen measurements are a crucial part of the quality assurance process.
Electro-Chemical Devices Triton TR86 suspended solids sensor and T80 transmitter
31 August, 2015 | AMS Instrumentation & Calibration Pty LtdThe Triton TR86 sensor by Electro-Chemical Devices is designed for the continuous measurement of suspended solids in various ranges from 0-1000 to 0-5000 mg/L.
