ECD Triton DO82 optical dissolved oxygen analyser
04 November, 2019 | AMS Instrumentation & Calibration Pty LtdThe ECD Triton DO82 is a solution for long-term dissolved oxygen measurements in wastewater aeration basins, aquaculture and all types of environmental water.
McCrometer FPI Mag flowmeter
01 November, 2019 | AMS Instrumentation & Calibration Pty LtdThe McCrometer FPI Mag is said to meet or exceed industry standards of 0.5% accuracy with third-party testing verification.
Bronkhorst IN-FLOW mass flow meters
01 September, 2019 | AMS Instrumentation & Calibration Pty LtdThe IN-FLOW mass flow meters and controllers are designed fior high flow rate clean gases.
FCI ST51A and ST75A thermal dispersion flowmeters
05 August, 2019 | AMS Instrumentation & Calibration Pty LtdFCI has announced that its ST51A and ST75A thermal dispersion flowmeters now have a Modbus option.
Katronic KATflow 180 clamp-on flowmeter for gases
25 June, 2019 | AMS Instrumentation & Calibration Pty LtdThe Katronic KATflow 180 clamp-on flowmeter for gases is ATEX approved and has the ability to perform clamp-on measurement of gaseous flow at low pressures and in metal pipes.
ECD Model S88 hazardous location sensors
11 June, 2019 | AMS Instrumentation & Calibration Pty LtdThe Model S88 Intelligent Sensors range, from ECD, includes pH, ORP, ion selective, dissolved oxygen, conductivity and resistivity sensors.
NOSHOK intelligent pressure transmitters
21 May, 2019 | AMS Instrumentation & Calibration Pty LtdThe NOSHOK 20, 25 and 30 Series Intelligent Pressure and Level Transmitters are designed to address the specific requirements of the food and beverage industry.
FCI retractable packing gland kits
06 May, 2019 | AMS Instrumentation & Calibration Pty LtdFCI Retractable Packaging Gland Kits for the ST Series flowmeters make maintenance simpler for the insertion-style meters.
Bronkhorst CORI-FLOW mass flow meter
20 March, 2019 | AMS Instrumentation & Calibration Pty LtdUsing a low flow control system containing a Bronkhorst CORI-FLOW mass flow meter can help to manage the dosage of corrosion inhibitors more accurately.
Electro-Chemical Devices Model T80 pH transmitter
01 March, 2019 | AMS Instrumentation & Calibration Pty LtdT80 transmitters work with any ECD S80 digital sensor, automatically configuring the transmitter's menus and display screens to the measured parameter.
Bronkhorst MASS-STREAM mass flow meters for gases
15 November, 2018 | AMS Instrumentation & Calibration Pty LtdMASS-STREAM instruments operate on the basis of direct through-flow measurement in accordance with the constant temperature anemometer principle.
AptiFlow universal flow meter
01 November, 2018 | AMS Instrumentation & Calibration Pty LtdThe AptiFlow is a universal flow meter designed to measure liquids, gases and vapours in a wide range of applications.
Fluid Components International ST75 air/gas flow meter for dosing applications
05 September, 2018 | AMS Instrumentation & Calibration Pty LtdDesigned for gas dosing and injecting applications, the ST75 air/gas flow meter from Fluid Components International (FCI) features a solid-state thermal dispersion mass flow sensing element with platinum RTDs.
Michell Instruments Easidew 2-wire dewpoint transmitter
30 July, 2018 | AMS Instrumentation & Calibration Pty LtdMichell Instruments has introduced an updated version of its 2-wire Easidew dewpoint transmitter, with a simultaneous analog and digital Modbus RTU output and a rugged 5-pin M12 electrical connection.
Michell Instruments QMA601 process moisture analyser
03 July, 2018 | AMS Instrumentation & Calibration Pty LtdThe QMA601 process moisture analyser has been updated with an option that makes it suitable for continuous catalyst regeneration (CCR) reforming processes.
