AMS Instrumentation & Calibration Products

Air content control system

06 December, 2006 | AMS Instrumentation & Calibration Pty Ltd

The PMC-Paprican Air Content Probe and Control System has been designed specifically for use in the pulp and paper industry. It can also be used effectively in other applications where the measurement or control of air content is important, such as water/waste and mining industries.

Electromagnetic flowmeter

05 June, 2006 | AMS Instrumentation & Calibration Pty Ltd

The MagneW 3000 Hyper-Fill was developed for high-speed batching and filling machine operations. Hyper-Fill is a magnetic flowmeter optimised for the sophisticated measurement demands found in these industries. Repeatable measurements are produced using this technology.

Ultrasonic flowmeters

06 March, 2005 | AMS Instrumentation & Calibration Pty Ltd

The Elis Plzen ultrasonic flowmeters have been designed for industrial applications where they can measure flow rates of a wide range of liquid media, whether electrically conductive or not, including specific corrosive liquids. The scope of applications for ultrasonic flowmeters covers many functions across many industries.

Smart transmitters

17 January, 2005 | AMS Instrumentation & Calibration Pty Ltd

PMC has released the Smart family of pressure and level transmitters, which can be retrofitted to their existing range of pneumatic and electronic transmitters. The transmitters are suitable for the chemical, pharmaceutical and food industries.

42510 infrared thermometer

05 December, 2004 | AMS Instrumentation & Calibration Pty Ltd

Extech's wide range infrared (IR) thermometer, model 42510, measures from -50 to 538°C with 0.1° resolution.

Loop calibrator

14 October, 2003 | AMS Instrumentation & Calibration Pty Ltd

Tek Know has released the latest 4-20 mA loop calibrator.

I/P transducers

20 May, 2003 | AMS Instrumentation & Calibration Pty Ltd

The Bellofram Type 2000 Transducer is an electro-pneumatic device that converts an analog electrical signal into a directly proportional output pressure.

Process line control

28 February, 2003 | AMS Instrumentation & Calibration Pty Ltd

Tracepak pre-engineered, pre-insulated systems control freezing, dew-point, component drop-out and viscosity in small diameter process lines.

Pressure regulator

28 February, 2003 | AMS Instrumentation & Calibration Pty Ltd

Marsh Bellofram's P627 Regulator is designed for both high and low pressure applications in the oil and gas industries. These regulators provide durability from the powder-coated epoxy exterior finish and versatility from the multi-position body and spring case configurations.

  • All content Copyright © 2024 Westwick-Farrow Pty Ltd