IR thermometer system
25 September, 2009 | AMS Instrumentation & Calibration Pty Ltd
Ircon has introduced an enhanced version of its Modline 5R infrared thermometer with advanced signal detection and attenuation alarming capabilities. The Modline 5 Series 5R ratio sensors are designed for non-contact, infrared temperature measurement applications involving harsh industrial environments.
Tension and compression transducers
21 September, 2009 | AMS Instrumentation & Calibration Pty Ltd
Noshok 3540 Series tension and compression force transducers are available in many sizes and shapes to fit almost any application, including cable or rod tension, weight measurement, overload protection, clamping force and fill level measurement.
HART air/gas flowmeter
21 September, 2009 | AMS Instrumentation & Calibration Pty Ltd
The FlexMasster ST98 flowmeter series from Fluid Components International is now compatible with the HART communication protocol for use in large-scale process and plant automation systems.
CMX calibration software version 2.5
30 July, 2009 | AMS Instrumentation & Calibration Pty Ltd
Beamex has released version 2.5 of its CMX calibration software, which brings several improvements and additions in terms of functionality and features.
Tank level switch
25 June, 2009 | AMS Instrumentation & Calibration Pty Ltd
The FLT93 tank level switch from Fluid Components International is now rated for Safety Integrity Level (SIL) 2-compliant service. It has been classified as a Type A subsystem in accordance to IEC 61508-1 with a hardware failure tolerance of 0. The probability of failure on demand (PFD) meets SIL-2 capability standards.
Flare gas flowmeter
25 June, 2009 | AMS Instrumentation & Calibration Pty Ltd
The GF90 flare gas flowmeter from Fluid Components International is designed to solve the problem of measuring dangerous, explosive and toxic gases that often flow at extremely varying or low levels. It can measure waste gases of varying hydrocarbon composition down to a low 0.25 sfps for flare system disposal.
FCI ST51 thermal mass flow meter for mining gas measurement
25 June, 2009 | AMS Instrumentation & Calibration Pty Ltd
The ST51 mass flow meter from Fluid Components International has a non-clogging thermal dispersion mass flow sensing element design that operates over a wide flow range with low-flow sensitivity. This rugged design is suitable for wet, dirty coal mines and coal bed methane gas recovery environments.
Wireless monitoring and control system
11 May, 2009 | AMS Instrumentation & Calibration Pty Ltd
The Newport wiSeries meter-scanner-controller works with a large number of Newport wireless sensors for temperature measurement with thermocouples, RTDs and semiconductor sensors and for relative humidity and barometric pressure.
Differential pressure gauges
02 April, 2009 | AMS Instrumentation & Calibration Pty Ltd
The Noshok 1000 series digital pressure gauge offers accurate digital pressure indication. The gauge features an integrated battery with up to 4000 h of battery life, eliminating the necessity of fixed power supplies.
Pressure transducers
01 April, 2009 | AMS Instrumentation & Calibration Pty Ltd
Noshok’s 300 series compact-sized pressure transducer delivers long-term stability during operation and is suitable for use in general industrial applications where space is limited and durability is essential.
Digital pressure gauges
01 April, 2009 | AMS Instrumentation & Calibration Pty Ltd
The Noshok 1000 series digital pressure gauge features an integrated battery with up to 4000 h of battery life, eliminating the necessity of fixed power supplies.
Thermal mass flowmeter
12 March, 2009 | AMS Instrumentation & Calibration Pty Ltd
The ST75 flowmeter from Fluid Components International is now available in a remote mountable configuration for applications in hazardous areas or hard-to-reach locations. The ST75’s remote mount transmitter, which includes a full digital display, can be mounted up to 15 m away from its thermal mass flow sensor in the process piping and connected via two 0.50" FNPT cables.
Infrared thermal imaging system
11 March, 2009 | AMS Instrumentation & Calibration Pty Ltd
Ircon has announced its Maxline 2 system with a camera link interface supporting multiple thermal imaging cameras for a variety of automated process control and inspection applications. The system’s software has a built-in input/output relay and networking capabilities, enabling users to manage multiple processes and communicate with other systems, if needed, for greater interoperability and control.
Documenting process calibrator
01 November, 2008 | AMS Instrumentation & Calibration Pty Ltd
The Beamex MC4 is a compact-sized documenting process calibrator. Being a multifunction calibrator, the MC4 is suitable for calibrating various process parameters, such as pressure, temperature and electrical signals.
Pressure transmitters
05 October, 2008 | AMS Instrumentation & Calibration Pty Ltd
The AT9000 advanced transmitter from Yamatake is a microprocessor-based smart transmitter that features high performance and good stability. Capable of measuring gas, liquid, vapour and liquid levels, it transmits 4-20 mA DC analog and digital signals according to the measured differential pressure.
