FCI MT91 multipoint gas mass flowmeter
06 May, 2010 | AMS Instrumentation & Calibration Pty Ltd
The MT91 multipoint gas mass flowmeter from Fluid Components International (FCI) has been tested by TÜV Rheinland Germany and found to comply to EN 15267-1: 2009, EN 15267-2: 2009, EN 15267-3: 2007 and EN 14181: 2004.
Fluid Components International FS10A flow switch/monitor
25 March, 2010 | AMS Instrumentation & Calibration Pty Ltd
The Model FS10A flow switch/monitor from Fluid Components International (FCI) is a low-cost solution for continuously verifying flows within liquid or gas process analyser sampling systems. It is suitable for the continuous monitoring of analyser sample flows to provide the highest integrity process analysis without interruption.
AMS Vortab Insertion Panel flow conditioner
22 March, 2010 | AMS Instrumentation & Calibration Pty Ltd
The VIP (Vortab Insertion Panel) flow conditioner is designed to completely neutralise flow profile irregularities caused by elbows, valves, blowers, compressors and other flow disturbances that commonly occur in piping and duct runs and cause flowmeter inaccuracies. The VIP provides a swirl-free, symmetric and repeatable flow profile that flowmeters require for accurate measurement. They are designed for pipe diameters larger than 50 mm.
Noshok 400 Series mechanical pressure switch
15 February, 2010 | AMS Instrumentation & Calibration Pty Ltd
With a stable switching point setting, the robust Noshok 400 Series mechanical pressure switch converts pneumatic and hydraulic pressure into switching functions, and is designed for applications requiring maximum accuracy under high loads.
FCI 180 Series OEM thermal dispersion flow sensors
22 January, 2010 | AMS Instrumentation & Calibration Pty Ltd
The 180 Series OEM flow sensors from Fluid Components International (FCI) is a family of flow and level sensors that are claimed to offer high accuracy, fast response and long-term reliability using FCI’s thermal dispersion sensor technology to fit a wide range of OEM applications.
Ircon Modline 6 series of infrared thermometers
15 January, 2010 | AMS Instrumentation & Calibration Pty Ltd
Ircon has introduced the Modline 6 series of infrared thermometers. This line of sensors features advanced signal processing and background-reflected energy compensation capabilities and includes one- and two-colour fibre-optic IR devices designed for harsh operating environments.
Noshok sintered pressure snubbers
15 January, 2010 | AMS Instrumentation & Calibration Pty Ltd
Noshok’s sintered pressure snubbers are intended to provide a simple and cost-effective solution to protect expensive instrumentation.
Gas mass flowmeter
10 November, 2009 | AMS Instrumentation & Calibration Pty Ltd
The GF90 gas mass flow meter from Fluid Components International is designed for gas measurement applications, such as chlorinated water disinfection systems. As a solid state meter, the GF90 is designed to measure extremely low flow rates, and it is constructed of materials that make it impervious to highly corrosive, wet chlorine gas. Materials of construction for wetted parts include Hastelloy C as an option.
Flow/temperature/level switch
26 October, 2009 | AMS Instrumentation & Calibration Pty Ltd
The FLT93S flow/level/temperature switch from Fluid Components International performs monitoring, controlling and alarming of flow rates or levels of critical fluids such as foams, emulsion layers, liquids and slurries. Its rugged industrial design and housing are designed to provide high reliability and long service life under harsh plant environments in chemical refining, waste treatment and other industries.
Calibration pressure output controller
26 October, 2009 | AMS Instrumentation & Calibration Pty Ltd
The Beamex POC6 is an automatic pressure output controller, providing regulated output from vacuum to 70 bar (1015 psi). The POC6 can be used as a standalone pressure controller or integrated to the Beamex calibration system.
Manifolds for natural gas applications
29 September, 2009 | AMS Instrumentation & Calibration Pty Ltd
Noshok offers several 5-valve manifold options, designed for use with differential pressure transmitters. These manifolds employ two isolation valves, two equalising valves and a vent valve for use in natural gas applications.
Temperature transmitters
29 September, 2009 | AMS Instrumentation & Calibration Pty Ltd
Noshok’s 850 series electronic indicating temperature switch/transmitter utilises PT100 technology to provide continuous temperature monitoring, electronic temperature switching and 4-20 mA analog output while providing local digital indication.
IR thermometer system
25 September, 2009 | AMS Instrumentation & Calibration Pty Ltd
Ircon has introduced an enhanced version of its Modline 5R infrared thermometer with advanced signal detection and attenuation alarming capabilities. The Modline 5 Series 5R ratio sensors are designed for non-contact, infrared temperature measurement applications involving harsh industrial environments.
Tension and compression transducers
21 September, 2009 | AMS Instrumentation & Calibration Pty Ltd
Noshok 3540 Series tension and compression force transducers are available in many sizes and shapes to fit almost any application, including cable or rod tension, weight measurement, overload protection, clamping force and fill level measurement.
HART air/gas flowmeter
21 September, 2009 | AMS Instrumentation & Calibration Pty Ltd
The FlexMasster ST98 flowmeter series from Fluid Components International is now compatible with the HART communication protocol for use in large-scale process and plant automation systems.
