Instrumentation

Rain and spill detectors

26 October, 2009 | Supplied by: Amalgamated Instrument Co

Amalgamated Instrument Co has announced a flood/liquid detection and alarm system and a rain/precipitation detection and alarm system. The systems consist of a common detection and alarm module and specialised sensors for each function.


Enhanced radar level range

26 October, 2009 | Supplied by: Endress+Hauser Australia Pty Ltd

Endress+Hauser has enhanced the performance of its radar level measurement range.


Flow/temperature/level switch

26 October, 2009 | Supplied by: AMS Instrumentation & Calibration Pty Ltd

The FLT93S flow/level/temperature switch from Fluid Components International performs monitoring, controlling and alarming of flow rates or levels of critical fluids such as foams, emulsion layers, liquids and slurries. Its rugged industrial design and housing are designed to provide high reliability and long service life under harsh plant environments in chemical refining, waste treatment and other industries.


pH/ORP monitor

26 October, 2009 | Supplied by: Amalgamated Instrument Co

The TP4-PH monitor accepts two channels of pH/ORP input as well as a temperature input. Each channel can be individually configured to accept a pH electrode, an ORP electrode or a 4-20 mA analog input. This makes the TP4-PH suitable for those applications where multiple inputs need to be monitored and control applied.


VK Series vibration switch

26 October, 2009 | Supplied by: ifm efector pty ltd

The VK Series vibration switch from ifm efector is designed to continuously monitor the vibration levels of critical plant equipment to help prevent machine failure and expensive downtime. The compact VK switch is designed to permanently mount on a machine to provide continuous feedback of vibration level via a 4-20 mA analog output.


Custody transfer flowmeter for oil products

26 October, 2009 | Supplied by: GE Pacific Pte Ltd - GE Sensing & IT

The Sentinel LCT from GE Sensing & Inspection Technologies has been designed for liquid custody transfer measurements of crude oil and refined oil products, offering an improved accuracy compared to traditional ship and tank level measurement. Extensive CFD (computational fluid dynamics) has been used to guarantee the high accuracy, even under conditions where flow conditions change constantly.


Custody transfer flowmeter for LNG

26 October, 2009 | Supplied by: GE Pacific Pte Ltd - GE Sensing & IT

Sentinel LNG is designed to provide accurate measurement of liquefied natural gas, offering an improved accuracy compared to traditional ship and tank level measurement. Extensive CFD (computational fluid dynamics) has been used to guarantee the high accuracy, even under conditions where flow conditions change constantly.


High-temperature miniature pressure transducer

20 October, 2009 | Supplied by: Bestech Australia Pty Ltd

The XPCM10 from FGP Sensors is a miniature pressure transducer designed for use in temperatures of up to 220 °C. It incorporates FGP Sensors’ SanShift technology that is designed to virtually eliminate zero shifts caused by installation torque.


Industrial pressure transmitter

19 October, 2009 | Supplied by: http://www.dwyer-inst.com.au

Dwyer Instruments' Series 626 and Series 628 pressure transmitters are available in stainless steel, general-purpose housing or cast-aluminium conduit housing.


Temperature measurement with single-, dual- and multi-wavelength technologies

18 October, 2009 by Tom Larrick* | Supplied by: Heastern Industries

Temperature measurement is complicated by the fact that the amount of infrared energy emitted by a surface is proportional to the emissivity as well as the temperature of the measured target.


Insertion DP flowmeter

29 September, 2009 | Supplied by: ECEFast

Using an aerofoil profile sensor to generate a differential pressure, the Wellbar flow sensor is suitable for a wide range of gases and liquids. The sensor is positioned across the flow and has multiple drilling points so that an average differential pressure is generated on the sensor ports.


Energy monitoring system

29 September, 2009 | Supplied by: OneTemp Pty Ltd

OneTemp has released the Hobo U30-ETH remote monitoring system, an industrial-grade energy monitoring system that provides real-time, remote access to energy and environmental data over any ethernet network.


Airborne particle counter

29 September, 2009 | Supplied by: Particle & Surface Sciences Pty Ltd

The Lighthouse Solair 1001+ airborne particle counter offers a sensitivity of 0.1 µm with a flow rate of 0.01 CFM (0.283 LPM) and a wide dynamic range up to 20 µm.


Dewpoint transmitters

29 September, 2009 | Supplied by: ECEFast

The EE371 and EE372 dewpoint transmitters from Austrian company E+E are designed to meet the need for more extensive monitoring of dewpoint temperature in air systems and dryers. Using a special monolithic measurement cell, type HMC01, the system achieves a measurement accuracy of ±2C Td.


Temperature transmitters

29 September, 2009 | Supplied by: AMS Instrumentation & Calibration Pty Ltd

Noshok’s 850 series electronic indicating temperature switch/transmitter utilises PT100 technology to provide continuous temperature monitoring, electronic temperature switching and 4-20 mA analog output while providing local digital indication.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd