WIKA PSD-30/TSD-30/LSD-30 pressure/temperature/level switches
16 August, 2011 | Supplied by: WIKA Australia
WIKA has launched a range of electronic switches for fluid technology in machine building. The industrial instruments measure and control pressure, temperature and level with an identical ‘look and feel’.
Primary producer transforming waste into green energy
14 August, 2011 | Supplied by: CST Wastewater Solutions
Clean water and green energy technology from Global Water Engineering (GWE) has been used by Chokyuenyong Industrial in Thailand to cut effluent COD pollution levels at its cassava production plant by more than 95%.
Yokogawa wireless instrument system
11 August, 2011 | Supplied by: Yokogawa Australia Pty Ltd
Yokogawa has released a range of wireless instruments including pressure, differential pressure and temperature sensors. They are designed to provide accurate transmission of data with virtual zero bit rate error up to 600 m, without the need for special antennas.
Rosemount 2051 pressure transmitter with Profibus PA
04 August, 2011 | Supplied by: Emerson
Emerson Process Management has expanded its Profibus offering to include the Rosemount 2051 pressure transmitter. The current portfolio of the Rosemount 3051 and 2051 pressure transmitters and the Rosemount 644 temperature transmitter are now available with Profibus PA profile V3.02.
Sitrans LR560 radar level instrument for solid materials
03 August, 2011 | Supplied by: Siemens Ltd
The Sitrans LR560 is a radar level instrument for solid materials levels in bins and silos to a depth of 100 m. It is a 2-wire plug-and-play, 78 GHz FMCW radar level transmitter for continuous monitoring of solids, with materials with εr\>2.
GE Energy Bently Nevada AnomAlert motor condition monitor
03 August, 2011 | Supplied by: GE Energy
Part of the Bently Nevada condition monitoring product line, AnomAlert uses motor voltage and current spectral analysis to provide predictive maintenance information for three-phase AC electric motors. Without the need for conventional monitoring sensors, the AnomAlert will detect mechanical and electrical anomalies in motor and machine train operation. Detailed information is presented by the AnomAlert standalone or System 1 software, which provides the user with an early warning of mechanical and electrical anomalies, recommendations for maintenance actions and a range of diagnostic analysis tools to verify and correct problems.
Impac IGA 320/23 short wavelength infrared measuring instrument
28 July, 2011 | Supplied by: W&B Instruments Pty Ltd
The Impac IGA 320/23 is a short wavelength infrared measuring instrument with internal digital signal processing. It is used for measurements of metallic surfaces, graphite and ceramics, etc.
Vega Vegapuls SR 68 radar level sensor
27 July, 2011 | Supplied by: VEGA Australia Pty Ltd
The Vegapuls SR 68 is a radar sensor for continuous measurement of bulk solids that is suitable for level measurement in silos and bunkers with heights up to 30 m.
Interworld Electronics Minigoose-II web-based remote temperature monitor
27 July, 2011 | Supplied by: http://www.ieci.com.au/products/product_page2.asp?Product_ID=5868
The Minigoose-II remote temperature monitor can be used to protect production processors, cool rooms, laboratories, server rooms, data centres and any critical facilities that require climate control.
Rosemount 3051S digital DP level system
22 July, 2011 | Supplied by: Emerson
Emerson Process Management has released a digital DP level system, the Rosemount 3051S Electronic Remote Sensor System. With over 10 patents, the 3051S ERS System is claimed to be a breakthrough technology that replaces mechanical impulse piping with two 3051S pressure sensors linked together electronically. Differential pressure is calculated in one of the two sensors and is transmitted using a standard two-wire 4-20 mA HART signal.
Dwyer Instruments Series 629 differential pressure transmitter
21 July, 2011 | Supplied by: Dwyer Instruments (Aust) Pty Ltd
The Series 629 differential pressure transmitter monitors differential pressure of air and compatible gases and liquids with 0.5% accuracy.
Pepperl+Fuchs F99 series acceleration sensors
19 July, 2011 | Supplied by: http://www.pepperl-fuchs.com.au/australia/en/15805.htm
The F99 series acceleration sensors are suitable for monitoring severe vibration or acceleration in a plant. Their robust housing and non-contact measuring claim to reliably help users avoid critical situations, particularly important for large systems.
Fluke 810 vibration tester
11 July, 2011 | Supplied by: Fluke Australia Pty Ltd
The Fluke 810 vibration tester is designed to enable maintenance teams to rapidly collect data and diagnose and solve mechanical problems with an easy-to-use tool. It is designed and programmed to diagnose the most common mechanical problems of unbalance, looseness, misalignment and bearing failures in a wide variety of mechanical equipment, including motors, fans, blowers, belts and chain drives, gearboxes, couplings, pumps, compressors, closed coupled machines and spindles.
Honeywell OneWireless Rotating Equipment Solution
01 July, 2011 | Supplied by: Honeywell Process Solutions
Honeywell has launched its OneWireless Rotating Equipment Solution, a suite of products and services that forms part of Honeywell Process Solutions’ (HPS) Reliability and Asset Management portfolio. The solution is designed to provide a means to monitor essential and critical plant assets wirelessly and in real time, saving customers money through improved uptime and reduced maintenance and repair costs.
Trimec TM Turbopulse/TP Turbopulse turbine meter series
22 June, 2011 | Supplied by: AMS Instrumentation & Calibration Pty Ltd
The Trimec TM Turbopulse mini and the larger TP Turbopulse turbine meter series measure flows of low viscosity liquids from 3 to 7,000,000 L/h in a range of sizes from 1/4 to 20″ (6~500 mm).
