Instrumentation

National Instruments stand-alone NI CompactDAQ system

29 October, 2012 | Supplied by: National Instruments Aust Pty Ltd

The NI CompactDAQ System features an Intel Core i7 dual-core processor, 2 GB RAM and 32 GB nonvolatile storage.


NEO Monitors Lasergas III SIL2 rated gas monitor

26 October, 2012 | Supplied by: B-R Controls Pty Ltd

The SIL2 rated LGIII uses TDLS technology and provides non-contact and interference-free measurements, without the need for regular calibration or maintenance.


Acces I/O USB-AIO12-16 Series USB multifunction analog I/O modules

23 October, 2012 | Supplied by: Interworld Electronics and Computer Industries

All USB-AIO12-16 modules are USB 2.0 high-speed devices and are compatible with both USB 1.1 and USB 3.0 computer ports.


Sierra Instruments SmartTrak 140 ultra-low ΔP mass flow controller

19 October, 2012 | Supplied by: Procon Instrument Technology

The SmartTrak 140 can control gas mass flow up to 500 slpm (nlpm) with an ultra-low ΔP of 4.5 psid.


Weber flow-captor 4140.13 flow switch

19 October, 2012 | Supplied by: Automated Control Pty Ltd

The Weber 4140.13 flow switch is suitable for liquid and pasty media.


LabVIEW helps Baumgartner break the sound barrier

17 October, 2012 | Supplied by: National Instruments Aust Pty Ltd

When Felix Baumgartner achieved his record-breaking jump on Monday, his progress and condition were monitored using NI LabVIEW.


Calex Electronics PyroMini infrared pyrometer

11 October, 2012 | Supplied by: Heastern Industries

The high ambient sensing head is capable of withstanding temperatures of up to 180°C without water or air cooling and has a measuring range of -20 to 1000°C.


ZigSense models ZS24-REU-001 and ZS09-REU-010 wireless pulse counting nodes

06 October, 2012 | Supplied by: Zigsense

The ZS24-REU-001 and ZS09-REU-010 wireless nodes are designed for ultralow-power pulse counting metering applications.


Futek IPM650 panel mount display

05 October, 2012 | Supplied by: Metromatics Pty Ltd

The IPM650 can be easily integrated with Futek’s load cells, torque sensors and pressure sensors, and offers an accuracy of 0.001%, as well as an internal resolution of 24 bits.


Yokogawa ADMAG AXR two-wire magnetic flowmeter

26 September, 2012 | Supplied by: Yokogawa Australia Pty Ltd

The ADMAG AXR two-wire magnetic flowmeter has been enhanced for use in SIL2 applications and to support the HART 7 protocol.


Mercoid Series 3200G smart pressure transmitter

20 September, 2012 | Supplied by: Dwyer Instruments (Aust) Pty Ltd

The Series 3200G smart pressure transmitter has flexible pressure calibration, push-button configuration and is programmable using HART communication.


Krohne Optimass 6400 twin bent tube Coriolis mass flowmeter

20 September, 2012 | Supplied by: KROHNE Australia Pty Ltd

The Optimass 6400 is designed to meet standard liquid and gas applications in the chemical and petrochemical, oil, gas, pharmaceutical, food and beverage, and energy industries. It features advanced entrained gas management (EGM).


Endress+Hauser Liquiline CDC80 aeration analyser

19 September, 2012 | Supplied by: Endress+Hauser Australia Pty Ltd

The Liquiline CDC80 monitors ammonium load and controls the oxygen blowers so the aeration process only runs until the ammonium value has reached a pre-defined lower set limit.


Baumer LBFS sensor switch for fill-level detection

17 September, 2012 | Supplied by: Transtech Electronic Control

Baumer claims its LBFS switch is a reliable alternative to vibratory level switches. The LBFS sensor can detect the levels of viscous or dry materials and can be fitted on tanks or pipes in any desired position.


Endress+Hauser Liquiline CM444 and CM448 multichannel analytical transmitters

14 September, 2012 | Supplied by: Endress+Hauser Australia Pty Ltd

Liquiline CM444 and CM448 multichannel analytical transmitters have a rugged plastic leak-proof, corrosion-resistant housing, suitable for water, oil, gas, chemical and power industries.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd