Instrumentation

Dwyer Series LOFM low-flow electromagnetic flow sensor

17 May, 2013 | Supplied by: Dwyer Omega (Aust) Pty Ltd

The Series LOFM low-flow electromagnetic flow sensor can accurately measure flow rates as low as 0.12 lpm, and is housed in splashproof HDPE plastic, making it suitable for chemical injection applications.


Dwyer Series PDWS insertion paddlewheel flow sensor

16 May, 2013 | Supplied by: Dwyer Omega (Aust) Pty Ltd

The Series PDWS insertion paddlewheel flow sensor is designed for pipe size ranges from 12.5 mm to 20 cm, and is available in a variety of materials.


General Monitors Model IR400 point IR combustible gas detector

06 May, 2013 | Supplied by: Aquip Systems Pty Ltd

The General Monitors Model IR400 point IR combustible gas detector features a 3 s T90 response time to the presence of combustible hydrocarbon-based gases, which allows plant operators to respond quickly to gas leaks and avoid potential accidents.


Crystal XP2i pressure gauges with PV411 hand pumps

30 April, 2013 | Supplied by: TechRentals

The Crystal XP2i pressure gauges with PV411 hand pumps are available for rent in various pressure ranges from 15 psi (1 bar), to 10,000 psi (689 bar) with NATA-certified accuracy.


McCrometer Mc Propeller flow meter

29 April, 2013 | Supplied by: AMS Instrumentation & Calibration Pty Ltd

The Mc Propeller flow meter is especially suited to dirty water flows, municipal and other high-volume water applications.


KEM TRICOR range of Coriolis mass flow meters

29 April, 2013 | Supplied by: Control Components Pty Ltd

TRICOR Coriolis mass flow meters are now available with IECEx hazardous area approval. Free from moving parts, these instruments provide accurate measurement of even aggressive and contaminated media.


ifm efector mid compact flow meter

22 April, 2013 | Supplied by: ifm efector pty ltd

The efector mid compact flow meter from ifm efector monitors volumetric flow quantities, total quantities and temperatures. Additionally, the measuring and evaluation units of this sensor are combined in a compact housing.


Condumax II hydrocarbon and water dew-point analyser increases confidence in gas quality

21 April, 2013 | Supplied by: AMS Instrumentation & Calibration Pty Ltd

Michell Instruments enabled a natural gas storage operator to improve the hydrocarbon and water dew-point measurements at its natural gas storage site in Europe.


ifm efector TAD series temperature transmitters

19 April, 2013 | Supplied by: ifm efector pty ltd

ifm efector’s TAD series of temperature transmitters, with integrated drift monitoring, diagnostic function and backup function, monitors temperatures with 0.2 K accuracy.


Sensorex TX-3000 pH/mV transmitter for process monitoring

18 April, 2013 | Supplied by: Envirosensors Pty Ltd

Sensorex’s TX-3000 pH/mV transmitter monitors changes in process fluids, displaying pH or oxidation reduction potential and temperature for more accurate control.


IMI Sensors Model 640B01 loop-powered vibration transmitter

17 April, 2013

The Model 640B01 is a 4-20 mA output vibration transmitter for permanent installation with a measurement range of 0 to 25.4 mm/s peak and a frequency range of 3-1000 Hz.


Precision Digital PD6801 ProtEX level meter

05 April, 2013 | Supplied by: Precision Digital Corporation

The PD6801 ProtEX level meter is an easy-to-read, 4-20 mA, loop-powered, explosion-proof meter designed for safe or hazardous environments, such as oil wells or chemical storage.


Precisive 5 compact hazardous area-compliant gas analyser

04 April, 2013 | Supplied by: Australian Dynamic Technologies Company Pty Ltd

The Precisive 5 gas analyser requires no carrier gases, no calibration gases and offers fast-response analytics without compromising accuracy, repeatability, linearity or stability in the presence of interferences.


West 8010+ digital process indicator

03 April, 2013 | Supplied by: Automated Control Pty Ltd

The West 8010+ digital process indicator provides a high-contrast, high-visibility display. The indicator is designed for optimal ease of use in a wide variety of temperature and process applications.


Asahi AL512 loop-powered digital indicator

29 March, 2013 | Supplied by: Bestech Australia Pty Ltd

Applications for the Asahi AL512 loop-powered indicator include any situation where 4-20 mA signals are to be displayed and require visual reading from a few metres away.


  • All content Copyright © 2025 Westwick-Farrow Pty Ltd