Acromag SP-230 signal splitter
01 August, 2018The Acromag SP-230 signal splitter converts a millivolt, voltage, current or thermocouple input into two proportional isolated 4–20 mA control signals.
FDT IIoT server-based architecture reaches member review milestone
29 June, 2018Emerging specification to transform open, standardised integration enabling sensor-to-cloud, enterprise-wide connectivity for automation solutions.
Wenglor EP0L001 IO-Link master
06 June, 2018The Wenglor EP0L001 IO-Link master is a multiprotocol module designed for consistent communication right on up to the field level.
Acromag uBSP signal splitter/duplicator
06 June, 2018The uBSP acts as a carrier for the microBlox line of plug-in signal conditioning modules to drive two scalable 4–20 mA or 0–10 V control outputs and an auxiliary 5 V third output from a single input.
Moore Industries celebrates 50 years
05 June, 2018Starting with only three staff in 1968, Moore Industries has enjoyed international success in the design and manufacture of interface technologies for industry.
PROFINET devices exceed 20 million in 2017
05 June, 2018Reflecting the increasing use of Industrial Ethernet-based technologies, twice as many PROFINET devices were installed in 2017 than for PROFIBUS.
FDT 2.1 release sets a path for the IIoT-connected enterprise
27 April, 2018Enhanced specification focused on security, performance, ease of use and investment protection.
5 reasons to use IO-Link
20 March, 2018IO-Link is a standardised communication technology. You let the sensors and actuators do the talking. Simply plug in the cable and off you go.
OPC Foundation and FieldComm Group cooperate on standard information model
05 March, 2018The OPC Foundation and FieldComm Group are cooperating to develop a standardised information model for process automation devices.
Automating yoghurt production in Chobani’s new plant
02 March, 2018When building its $30m plant, Chobani wanted to partner with experts who could respond to a production process based on a 'through process' as opposed to a 'batching process'.
Phoenix Contact Axioline E modular IO-Link interfaces
09 February, 2018The Axioline E IO-Link master can be set up as a modular I/O station.
China adopts FDT technology as national standard
12 January, 2018A cooperative initiative undertaken between FDT Group and Chinese standards organisations has resulted in a Chinese national standard for device integration based on FDT 2.0 technology.
Pepperl+Fuchs AS-Interface G10 Ultra-Compact Module
01 November, 2017The Pepperl+Fuchs AS-Interface G10 Ultra-Compact Module is an AS-I slave module with dimenisons of 22 x 27 x 40 mm per I/O.
Phoenix Contact IL EC BK-PAC and IL CO BK-XC-PAC bus couplers
20 October, 2017The modular Inline I/O system product range from Phoenix Contact has been extended with two bus couplers supporting EtherCAT and CANopen.
Beckhoff TwinCAT with HART field device integration
28 September, 2017Beckhoff has introduced a platform to support both factory automation and process automation by integrating process-specific protocols and interfaces, and by offering an extended range of products for hazardous areas.
