SEW-Eurodrive CMP servomotors
10 March, 2010 bySEW-Eurodrive’s CMP family of servomotors now offers torque ratings of 0.5 to 45 Nm, and is available in six frame sizes with speed ratings of 3000, 4500 and 6000 rpm.
DC motors for the food industry
01 April, 2009 byThe BG65 motors from Dunkermotoren have smooth housings in order that machinery and facilities manufacturers working within the food and beverage industry are able to capitalise on the advantages of electronically commutated DC motors.
E-Rodless electric actuators
01 December, 2008The E-Rodless range of electric actuators is designed to reduce the installation and commissioning time normally associated with some electric actuators.
ABB Australia low-voltage AC motors
01 November, 2008ABB Australia has launched low-voltage AC motors with improved energy efficiency and life cycle value. The motors are available from 0.06 to 95 kW while the frame size starts from 56, going all the way to 250. The range is classified into three ranges: general performance, industrial performance and process performance. Frame materials include cast iron and aluminium.
Portescap Athlonix DC motors
05 October, 2008The Portescap Athlonix high power density brush DC motors are compact, high-efficiency, high-endurance motors delivering high speed-to-torque performance in a compact lighter weight package (15-53 g depending on frame size) with output power of up to 9 W.
X-Y positioning base
05 October, 2008Baldor Electric Company has launched a ready-engineered linear stepper X-Y positioning base that is capable of dramatically increasing productivity in a wide range of machinery applications.
Brushless DC motor
05 October, 2008The EC-powermax 22 achieves high torque at slow speeds compared to other similar-sized brushless DC motors. The EC motor is particularly suitable for process applications like handheld tools such as slicing and drilling machines where top performance is required per volume and weight unit.
ERNTEC miniature stepper motor
05 September, 2008With a diameter of 22 mm and a high power-to-volume ratio, the AM 2224 achieves an output of 2.5 W and a peak holding torque of 45 mNm.
Synchronous servomotors
05 September, 2008Mavilor’s BL Series is a synchronous electrical servomotor, with three winding phases, supplied with sinusoidal or trapezoidal current wave forms.
AC servomotors
05 September, 2008The short mechanical time constant of the Mavolor MA Series AC servomotors makes them suitable for control operations, while an extremely short electrical time constant provides high peak torque at high speed. A high ‘theoretical’ acceleration also gives an extremely fast response time.
Brushless DC servomotor
05 September, 2008The Faulhaber Series 2057 motor is fitted with a high-energy rare earth magnet which results in a very responsive mechanical time constant of only 8 ms. The skew winding in combination with the laminated stator also provides good heat dissipation and high overload capability.
Miniature stepper motor
05 September, 2008With an outer diameter of 6 mm, a length of 9.3 mm and weighing 1.4 g, the ADM 0620 is claimed to be the smallest two-phase miniature stepper motor in the world.
DC motors
08 August, 2008The RE 65 power package delivers 250 W and can cope with the toughest demands. The motor is particularly suitable for applications where high efficiency, high power density and a minimal operating noise are crucial.
Inverter/geared motor combination
05 August, 2008The Movimot ‘D’ extends the continuous operating power of SEW-Eurodrive’s Movimot range of inverter/geared motor combinations to 4 kW. Incorporating SEW-Eurodrive’s MEPS-compliant and high-efficiency DR motor series and backwards-compatible with previous Movimot versions, the Movimot ‘D’ provides a flexible, energy-efficient, decentralised drive solution.
DC motor and drive packages
08 July, 2008Electronically commutated DC motors now incorporate functions that were previously the preserve of AC servo-motors. With output powers up to 500 W and torques up to 5 Nm, the BG75 DC motors by Dunkermotoren are able to take on numerous drive tasks in industrial automation.
