PT878 ultrasonic flowmeter
19 March, 2008The Panametrics PT878 portable liquid flowmeter measures from outside plastic, metal or concrete-lined pipes non-intrusively.
IR4 infrared thermometer
21 January, 2008The IR4 infrared thermometer is a dual-function thermometer with laser that offers a wide infrared temperature measurement range and supports K-type thermocouple probes.
Encoder signal generator
21 January, 2008The ENC-SIM encoder signal generator is designed to simulate all the signals available from an incremental encoder. The user can set the A/B phase relationship, frequency and the actual number of pulses generated. The generator provides the user with a means of testing control circuits and instruments without the need for any mechanical movement.
Infrared temperature calibration checker
17 December, 2007The Convir FTK non-contact infrared temperature calibration checker offers a fast, low-cost and highly accurate way to ensure infrared temperature sensors are operating within calibration limits, either in the lab or on the shop floor.
Process pressure calibrator
20 March, 2007With the CPH 6000 process calibrator, routine field tasks, such as calibrating pressure instruments and switches, are made easier.
Programmable DC electronic load
19 February, 2007The Model 8510 DC Electronic Load is fully programmable via the standard RS232 or optional USB interfaces. It is an affordable, full-featured programmable DC electronic load with a high degree of accuracy and outstanding front panel display resolution. It is suitable for testing DC power supplies, power components, batteries, DC-DC converters and battery chargers in the areas of R&D, manufacturing, service and QC.
Digital conductivity meter
06 December, 2006The GMH3430 is a versatile digital conductivity meter with a measurement range between 0.0 µS/cm to 200.0 mS/cm. The measurement range selection is automatic or can be manually set.
Validation testing
15 November, 2006The Qualmark Typhoon 1.5 HALT (highly accelerated life test) chamber provides users with the ability to test the stability and reliability of electronic and electro-mechanical products at an early stage in the design and development process.
Network manager
15 November, 2006FTS4Control (formerly NetDecoder) is an industrial control, SCADA protocol, data and timing analyser designed to help isolate problems with serial, ethernet and fieldbus networks.
Surface inspection
06 October, 2006The sample testing unit ST-4 from Optical Control Systems is designed to precisely inspect small area surfaces. The system detects impurities, holes, scratches and other irregularities and is suitable for R&D, technical centres and customer support.
Calibrator models
06 October, 2006The Fluke 717/718 family of calibrators is suitable for calibrating transmitters, gauges and switches. The calibrators are compact, lightweight and easy to carry.
Mass flow calibrator
07 September, 2006The Teledyne API M700E is a lightweight, microprocessor-based calibrator for multi-point and single-point calibration of precision gas analysers.
PXI-4110 programmable DC power supply
04 May, 2006Engineers now can source voltage or current with high accuracy from a single PXI slot with the National Instruments PXI-4110 programmable DC power supply.
Calibration software
04 May, 2006Intecal is a calibration management software platform developed to maintain and control a calibration environment. The software has been adapted for both the calibration laboratory and the process industry where digital pressure calibrators and/or portable calibrators are used to calibrate and validate pressure sensors, transducers, gauges, pressure switches and plant instrumentation.
Installation tester
04 May, 2006The InstalTest 3017 installation tester is claimed to be Australia's first installation tester with measurement functions and pass/fail limits set to AS/NZS3000 Wiring Rules.
