Fluke 430 Series II three-phase power quality analysers
13 February, 2012The Fluke 430 Series II three-phase power quality analysers are designed to help facilities reduce electrical power consumption and improve the performance and lifespan of electromechanical equipment by providing the return on investment (ROI) justification to mitigate power quality distortion.
Brüel & Kjær 4448 personal noise dose meter
30 January, 2012The Brüel & Kjær 4448 personal noise dose meter assesses noise exposure in the workplace, informing users of the level of hearing protection required.
Metrology in the real world
16 December, 2011 by Greg FerrarTo make the right decisions you have to learn to doubt your measurements.
Crystal nVision Pressure Calibrator 30 bar
02 November, 2011 byThe Crystal nVision Pressure Calibrator 30 bar is an intrinsically safe NATA-certified pressure calibrator. It displays real-time recorded data graphically on a high-resolution screen and can be used to download the data during testing.
Fluke DTX-1800, 900 MHz CAT 7 CableAnalyser
13 October, 2011 byAvailable to rent, the Fluke DTX-1800, 900 MHz CAT 7 CableAnalyser accurately tests cable certification up to Category 7 a claimed three times faster than others, streamlining every aspect of the certification job from set-up, testing and troubleshooting, to reporting results.
Fluke 750 Series Documenting Process Calibrator
01 September, 2011 byThe 750 Series Documenting Process Calibrator can calibrate temperature, pressure, voltage, current, resistance, and frequency and has three operating modes: measure, source and simultaneous measure/source.
FW Bell 5180 Gauss/Tesla meter
01 September, 2011 byTechRentals now has the FW Bell 5180 Gauss/Tesla meter available for rental.
Katronic Audible Sensor Positioning Assistant for flowmeters
16 August, 2011 byThe Katronic KATflow 200, 230 and 150 ultrasonic clamp-on flowmeters are all equipped with the Audible Sensor Positioning Assistant, which makes correct sensor installation simple and quick. The assistant indicates the correct position of the sensors during the installation on the pipe using acoustic signals and graphic instructions. In combination with the instrument set-up wizard, this technology enables even inexperienced users to install the sensors and carry out measurements within a matter of minutes.
Fluke 434/PWR power quality analyser
10 August, 2011 byThe Fluke 434/PWR power quality analyser is designed to help electricians, field service engineers and maintenance technicians uncover energy waste in commercial and factory buildings as well as in equipment and machines. It can be used to conduct energy consumption studies and electrical load analysis, and to perform power quality logging and analysis surveys.
Kistler Staiger Mohilo electric motor test stands
02 August, 2011 byKistler Staiger Mohilo has released its range of electric motor test stands. The modular design uses 4-quadrant active brakes to torque load electric motors from 0.01 up to 25,000 Nm.
Fluke DTX-1800 CableAnalyser 900 MHz Cat 7
29 July, 2011Available to rent, the Fluke DTX-1800 CableAnalyser 900 MHz Cat 7 accurately tests cable certification up to Category 7. The device streamlines every aspect of the certification job from set-up, testing and troubleshooting, to reporting results.
Fluke ScopeMeter 190 Series II 2-channel portable oscilloscope
25 July, 2011 byThe Fluke ScopeMeter 190 Series II is a 2-channel handheld portable oscilloscope that includes a 5000-count digital multimeter and paperless recording modes, creating an advanced test and measurement tool. The unit has a rugged IP51 sealed case that can withstand 3 g vibration or 30 g shock and a CAT III 1000V/CAT IV 600V safety rating.
Hydac test gauge kits
12 July, 2011Available with one, two or three gauges, the Hydac test gauge kits offer accurate, precise and efficient pressure control and monitoring for hydraulic systems, while eliminating the risk of introducing contamination.
Fluke Networks DTX Patch Cord Test Adapter Series
10 June, 2011 byFluke Networks has released the DTX Patch Cord Test Adapter Series that can be used to certify both shielded and unshielded category 5e, 6 and 6A cable assemblies to global ANSI/TIA 568-C and ISO 11801:2010 standards.
Dewetron DEWE-3020 portable measurement Instrument
07 June, 2011 byThe Dewetron DEWE-3020 portable measurement instrument is the claimed smallest, rugged, all-in-one measurement system for galvanically isolated amplifiers.
