Turck 3- and 4-branch M16 tees
20 December, 2010 byTurck has introduced h-style (3-branch) and H-style (4-branch) M16 tees, designed for saving field installation time and hassle in comparison to hardwired cable tray installations. The tees are available in various configurations, including tees with a male connector on either side of the trunk line, integral connections or cable drops.
Hirschmann CA series connectors
29 October, 2010 byThe Hirschmann CA series industrial circular connectors, the, which were previously only available in black, are now also available in red, white and blue.
Samtec AccliMate sealed ethernet cable plug and receptacle system
23 August, 2010 bySamtec has recently expanded its line of sealed interconnect systems with the AccliMate sealed rectangular ethernet cable plug and receptacle. The system is designed for industrial and other harsh environments with a silicon seal that meets IP68 specifications for dust and waterproof sealing.
Harting Han-Compact metal hood
23 August, 2010 byHarting’s Han-Compact metal hood with different cable entry directions is suitable for all contact inserts of the Han-Compact size.
Turck M12 adapters
26 July, 2010 byTurck has introduced M12 adapters that may be used to connect incompatible round connectors quickly and easily. These compact connectors can be used instead of reordering cables or adding junction boxes, saving installation time and equipment costs while consuming minimal storage space.
Turck M12 true torque connectors
20 July, 2010 byTurck has introduced M12 true torque connectors that can be hand-tightened to a predefined torque, preventing overtightening. Once the correct torque has been achieved, the nut rotates freely - indicated by a clear haptic and audible signal.
Switchcraft sealed, locking power jacks and plugs
28 April, 2010 bySwitchcraft has added sealed, locking power jacks and plugs to its range of DC connectors.
Harting Han-Yellock connector housing
19 April, 2010The Han-Yellock housing has a split on the cable side. The surface and add-on parts have been designed for harsh industrial requirements, such as those found in the machine construction industry, energy technology and plant construction.
Turck IMS interface modules
08 April, 2010 byTurck has announced that its IMS interface modules are now UL certified for Class I, Division 2, Groups A, B, C and D hazardous locations. The 6.2 mm wide IMS modules provide complete galvanic isolation, resisting electrical interference and noise in busy plant environments, with signal conditioning for new or retrofit hazardous area installations.
Turck explosion-proof minifast receptacles
08 April, 2010 byTurck has announced 1″-16UN and 1-1/8″-16UN minifast explosion-proof, feed-through receptacles, which install directly into standard 3/4″ conduit entries without requiring additional conduit or poured seals. These quick-disconnect B-size (1″) and C-size (1-1/8″) receptacles expedite installation while maintaining the explosion-proof ratings of instrument housings and explosion-proof enclosures in Class I, Division 2 hazardous areas.
Harting CP 600 manual pneumatic crimping tool
25 March, 2010The CP 600 manual pneumatic crimping tool has a quick lock that allows various tool heads to be easily and reliably inserted, and removed quickly and easily.
Harting Han 200 A crimp module
25 March, 2010The Han 200 A crimp module has been added to the Han-Modular series. This addition is compatible with the Han 200 A axial screw module.
Harting Han HPR series bulkhead and surface-mount housings
25 March, 2010Harting has added extended angled bulkhead and surface-mounting housings size 3 A to its Han HPR series.
Turck 7/8-16UN explosion-proof feed-through receptacle
10 March, 2010 byThe 7/8-16UN minifast explosion-proof feed-through receptacle is CSA certified as a secondary conduit seal. This quick-disconnect solution can serve as a secondary conduit seal to prevent gas migration or as a boundary seal, when used with a Turck CSA certified cordset. The receptacle may be applied in Class I, Division 2 locations without the use of intrinsically safe circuits or in Class I, Division 1 locations with intrinsically safe circuits.
Belden PowerCinch modular power distribution system
10 March, 2010 byBelden has introduced PowerCinch, a modular power distribution and motor control connection system for machinery applications that has been developed under the Lumberg Automation brand.
