Moxa IMC-21A industrial ethernet-to-fibre media converter
18 July, 2011 | CrispTech Pty Ltd
The Moxa IMC-21A industrial ethernet-to-fibre media converter converts from 10/100BaseTx to 100BaseFx and is designed to meet the needs of critical applications - it can operate reliably and stably in a wide temperature range of -40 to 75°C and is housed in a rugged metal case.
Noshok electronic indicating pressure and temperature transmitter/switches
18 July, 2011 | AMS Instrumentation & Calibration Pty Ltd
Noshok electronic indicating pressure and temperature transmitter/switches provide local monitoring, 4-20 mA current output and switching control.
Boge D Series adsorption dryers
15 July, 2011 | Boge Compressors (Australia) Pty Ltd
The Boge D Series adsorption dryers utilise the traditional twin tower system; however, each tower contains a cartridge that contains pre- and after-filtration as well as the desiccant media - while one tower adsorbs humidity, the other one regenerates the desiccant.
Balluff Q40 multi-metal inductive proximity sensor
15 July, 2011 | Balluff Pty Ltd
The Balluff Q40 inductive proximity sensor provides sensing ranges up to 40 mm in a small housing, with weld field immunity and the ability to sense aluminium and steel at the same distance. Each sensor head can be mounted in five positions and has highly visible corner LEDs. The connector outlet is also adjustable within a 270° range.
Swagelok pre-engineered fluid distribution header
14 July, 2011 | Swagelok Corporation
A pre-engineered, fully documented piping system, the Swagelok Fluid Distribution Header (FDH) can serve as a distribution or collection manifold in gas or liquid applications. The FDH is a Swagelok Pre-Engineered Subsystem, part of a series of pre-engineered, preassembled products designed to provide increased efficiency in installation, operation and procurement in fluid systems.
Balluff BKT 67M contrast sensors
14 July, 2011 | Balluff Pty Ltd
Balluff’s BKT 67M contrast sensors are claimed to detect even the slightest contrast differences in challenging packaging applications. These sensors are specifically designed for fast and reliable print-mark detection.
Endress+Hauser Levelflex FMP55 multiparameterlevel transmitter
14 July, 2011 | Endress+Hauser Australia Pty Ltd
The Levelflex FMP55 level transmitter uses both capacitance and guided wave radar technologies to measure level and the interface between two liquids.
Endress+Hauser EngyCal RH33 Btu and RS33 steam billing meters
14 July, 2011 | Endress+Hauser Australia Pty Ltd
The EngyCal RH33 Btu meter and RS33 steam meter provide high-precision data recording and billing information for custody transfer, steam measurement and energy-flow calculations for process and facility applications.
Doberman DGM-410 M2M mini programmable controller
14 July, 2011 | Ethernet Direct
The Doberman DGM-410 is an M2M mini programmable controller equipped with a cellular transceiver intended to monitor industrial equipment. Its purpose is to send real-time data to the monitoring system in order to provide real-time status and can handle large amounts of data. The optional GPS model can serve as a tracking system used in vehicle management or maritime systems. The DGM series is designed with GPRS/GSM module, an ethernet interface, optional GPS module, three digital inputs and three digital outputs, eight analog inputs, two RS232 ports and an RS485 port. The DGM series is suitable for industrial rated environments due to its robust housing design.
Banner Engineering SureCross Industrial Wireless I/O Network brochure
14 July, 2011 | Micromax Pty Ltd
The Banner Engineering SureCross Industrial Wireless I/O Network brochure is now available in both a print and an interactive version. The brochure provides comprehensive information on a new line of SureCross 1 W radios. These new radios offer increased I/O counts to accommodate most application requirements, in addition to a higher-powered radio transmitter to increase the range of wireless networks.
Fluke P3 Series thermal imagers
14 July, 2011 | Fluke Australia Pty Ltd
Based on the Fluke Ti32, the P3 Series thermal imagers add four additional products.
Dytran Instruments 3274A series piezoelectric accelerometers
14 July, 2011 | Metromatics Pty Ltd
The 3274A series miniature, low-profile, IEPE piezoelectric accelerometers are designed to mount in spaces typically inaccessible to other types of accelerometers.
Exlar PRS and PRR planetary roller screws
13 July, 2011 | Applied Automation
Exlar’s component planetary roller screw line has been expanded to include two performance capacities, available in PRS and PRR models. The PRS models, with G5 lead accuracy, are available in screw diameters ranging from 8-80 mm and deliver static load ratings up to 970 kN. Exlar’s PRR models, with G9 lead accuracy, are available in screw diameters of 12 to 27 mm and offer static loads up to 80 kN.
Superior Pump Technologies range of F&B pumping solutions
13 July, 2011 | Superior Pump Technologies
Superior Pump Technologies specialises in supplying pumping equipment to the food industry, as well as oil and gas, water and wastewater and pharmaceutical users. The company designs and builds pump units tailored to specific users’ requirements.
Pepperl+Fuchs UMC3000 ultrasonic washdown sensors
13 July, 2011 | Pepperl+Fuchs (Aust) Pty Ltd
The UMC3000 ultrasonic sensor has a seamless, 100% stainless steel housing and chemically resistant cable system to enable ultrasonic monitoring and control in areas previously considered impossible.
