Besta BLS frequency sweep level switch

Tuesday, 06 May, 2014 | Supplied by: Control Components Pty Ltd

Besta BLS frequency sweep level switch

The Besta BLS frequency sweep level switch offers a compact alternative to vibrating tuning forks.

A single sensor will detect a wide range of different applications including bulk goods/grains and liquids (high or low viscosity) - even with sticky or pasty media. Typical installations include petrochemical, pharmaceutical, food and beverage and general industry (for lubricants and coolants).

With no moving parts, this rugged design sensor is immune to shock and vibration (IEC 60068-2-6, GL test 2). It can be mounted in any orientation under tough process conditions (-40 to 115°C, up to 100 bar) and is immune to foams and suspended particles. The BLS has a fast reaction time of less than 100 ms, but can be factory set to include switch damping (0-10 s).

Online: www.controlcomponents.com.au
Phone: 02 9542 8977
Related Products

Rosemount 625IR Fixed Gas Detector

The Rosemount 625IR is designed to provide fast gas detection in all plant environments using...

Hawk FPM Flotation PulpMaster level instrument

The FPM Flotation PulpMaster is a continuous level measurement system designed to meet the...

Rosemount 470XA gas chromatograph

The Rosemount 470XA gas chromatograph is designed to simplify natural gas analysis in custody...


  • All content Copyright © 2025 Westwick-Farrow Pty Ltd