The latest Wenglor luminescence sensors offer an IO-Link communication interface to make it easy to configure parameters, output intensity values, operate condition monitoring or set on and off delays.
The sensor housing has also been given a functional facelift with a central teach-in button and two LEDs on the top of the sensor to make operation simpler. If the button is held down for two or five seconds, objects can be taught in statically or dynamically. To teach in the sensor remotely, users can use Wenglor’s wTeach2 configuration software.
The technology is housed in Wenglor’s 1P housing (50 × 50 × 20 mm). An extended working range of 30–90 mm and a small light spot diameter, combined with a high switching frequency of 2.5 kHz provide a wide performance range. Receiving ranges are between 420 and 750 nm (P1PA001) and 570 and 750 nm (P1PA002).
Phone: 1300 65 75 64
ABB IRB 7710 and IRB 7720 robots
ABB Robotics has expanded its modular large robot range with the introduction of the IRB 7710 and...
Siemens Simatic S7-1200 G2 controllers
The Simatic S7-1200 G2 controllers offer higher communication performance and more efficient data...
SMC EQ Series actuators with integrated controller
SMC Corporation's EQ series of slide-type and rod-type actuators include an integrated...
Learn More
I am interested in Wenglor luminescence sensors.
Complete the form and a supplier representative will be in touch.
