Pilz PDP20 F 4 mag interface
30 April, 2013The PDP20 allows series connection of various sensors up to Category 4 of AS4024.1-2006, with up to four sensors connected to each PDP20 module, and the ability to cascade the modules to increase the number of sensors that can be monitored.
Schmersal BNS 40S coded magnetic safety sensor
04 December, 2012The Schmersal BNS 40S is a robust, coded magnetic safety sensor made from precision cast high-grade stainless steel and specifically designed for the food and beverage industry.
Sick S300 Mini safety laser scanners
12 October, 2012The S300 Mini safety laser scanner has construction height of only 116 mm, allowing installation with a minimum of space required.
Howard Leight by Honeywell Quietdose personal dosimeter
04 October, 2012The Quietdose is an ‘in-ear’ dosimetry device that measures the noise that workers hear accurately and in real time.
Ampcontrol IQguard range of fixed toxic and combustible gas detection instruments
28 September, 2012Designed and manufactured in Australia, the IQguard range of gas detection equipment has been targeted to fit applications requiring accurate and reliable gas monitoring where a high degree of safety is required.
Banner Engineering EZ-Screen safety light curtain with integral muting
02 February, 2012 byThe Banner Engineering EZ-Screen low-profile safety light curtain with integral muting is designed for use on smaller production machines.
Pilz PLIDdys safe line inspection device
01 October, 2011 byThe Pilz range now includes a safe line inspection device for use on single-channel two-wire connections. The PLIDdys device ensures safe power-up and maximum safety on long cable routes of up to three kilometres.
Leuze coded magnetic safety system
19 September, 2011 byThe coded magnetic safety system is intended for guards and, due to a closed design and the high-strength plastic housing, is suitable for use under critical environmental conditions such as in the pharmaceutical, food and timber industries.
Pilz PSENini safety proximity switch
26 July, 2011 byThe safety proximity switch PSENini from Pilz detects the approach of metallic objects without using contacts. Safe detection is provided even on multiple position applications - with long cams or rotational movements. The non-wearing technology is suitable for high switching frequencies.
Steute EEx ZS 73 SR series hazardous area belt drift switches
28 April, 2011 byThe Steute EEx ZS 73 SR series of hazardous-area belt drift switches can be used to monitor the alignment of conveyor belts and, depending on the application, can either be used to switch off the equipment or to provide automatic correction of the belt’s alignment should a misalignment occur.
Banner Engineering AG4 safety laser scanner
17 December, 2010 byThe AG4 safety laser scanner from Banner Engineering uses pulsed infrared laser light to locate the position of objects in its field of view. It is designed to safeguard irregularly shaped areas not suitable for a standard two- or three-piece safety light screen. By meeting all requirements for Type 3 per IEC 61496-1/-2, Category 3 PLd per EN ISO 13849-1 and SIL2 per IEC 61508, the scanner is suitable for applications including area guarding, access/perimeter guarding, and automated guided vehicle collision avoidance.
Leuze electronic S410 safety hinge switch
20 September, 2010 byThe S400 series of safety hinge switches has been extended in order to simplify the installation further, especially for greater profile thicknesses. The S410 safety hinge switch allows for a greater profile thickness and is also suitable for glass and plastic hoods since the fasteners, which lie further inward at a greater distance to the material’s edge, provide additional stability.
Leuze electronic safety cascades
20 September, 2010 byIn situations where hand and arm protection requires high accessibility or if stepping behind protection is needed, cascaded safety light curtains are the first choice, for example, at hydraulic press brakes, assembly workstations or engine test benches. Leuze electronic provides a number of different cascades (90° U-shape, 90°/45° L-shape) to suit common applications.
Sperian Biosystems NXP multi-gas detection system
23 August, 2010 byA single-channel fixed placement multi-gas detection system, Biosystems NXP is engineered to provide 24/7 monitoring of dangerous gas and atmospheric conditions. The NXP can be fitted with various sensor options including O2, CO, H2S, SO2 and NH3 as well as CO-H, and LEL.
Omron F3S-TGR-N stainless steel coded non-contact switches
17 August, 2010 byThe F3S-TGR-N stainless steel coded non-contact switches have been introduced with the food processing industry in mind. The switches are used to interlock hinge, sliding or removable guard doors.
