Instrumentation > Level

Honeywell Enraf Terminal Manager R260

21 November, 2013

Terminal Manager R260 is the latest version of Honeywell Enraf's solution for managing the entire operation in bulk terminals, and introduces a modular configuration and configurable workflows.


Endress+Hauser Micropilot FMR5x radar level instruments

02 September, 2013

The Micropilot FMR5x family of non-contact level measurement instruments now offer multi-echo tracking, which allows the instruments to remain accurate when a tank with obstacles is being filled and emptied.


VEGA VEGAMIP 61 microwave barrier level limit sensor

13 August, 2013

Whether in bulk solids or liquids, the VEGAMIP 61 microwave barrier is designed to detect the limit level with absolute certainty in very rough process conditions.


Rosemount 3308 wireless guided wave radar transmitter

19 July, 2013

The Rosemount 3308 is a WirelessHART guided wave radar (GWR) transmitter for continuous level and interface monitoring, deigned for level monitoring in remote or difficult-to-reach locations where installing new cabling would be costly or impractical.


Dwyer Instruments Series PLS2 electromechanical level switch

06 June, 2013

The Series PLS2 is an electromechanical level switch designed for level monitoring of bulk materials using a rotating measuring vane.


NOHKEN CG300 capacitance level sensor

05 June, 2013

The NOHKEN CG300 series capacitance level sensors are designed for liquid level detection and measurement, offering an accuracy of ±0.5% FS and an operating temperature range of -20 to 60°C.


Precision Digital PD6801 ProtEX level meter

05 April, 2013

The PD6801 ProtEX level meter is an easy-to-read, 4-20 mA, loop-powered, explosion-proof meter designed for safe or hazardous environments, such as oil wells or chemical storage.


Choices in automated level detection: Part 2

12 March, 2013 by Glenn Johnson, Editor

In part 1 of this article we looked at the challenges associated with level measurement and at a few of the common point level detection technologies available. In this part we move on to overview continuous level measurement technologies.


Choices in automated level detection: Part 1

18 February, 2013 by Glenn Johnson, Editor

There are many technologies available today for the automated measurement of the level of a material in a vessel. All the available techniques work when applied correctly in the appropriate situation.


API Industry TLA-500 tank level alarm system

08 February, 2013

The TLA-500 tank level alarm system provides safety during loading and storage of liquids and is IECEx certified intrinsically safe.


Dwyer Series UTC ultrasonic liquid level transmitter controller

01 February, 2013

The Series UTC ultrasonic liquid transmitter controller provides reliable, accurate, non-contact measurement of liquid level and open channel flow even under extremely harsh conditions.


WIKA LH-20 submersible pressure transmitter for level measurement

06 December, 2012

The WIKA LH-20 submersible pressure transmitter is a slender, high-performance instrument, with a diameter of only 22 mm and an accuracy of up to 0.1%, even in harsh operating conditions.


Hach Sonatax sc with sc200/sc1000 controller

30 November, 2012

The Hach Sonatax sc with sc200 controller is designed to continuously measure the sludge blanket level.


Dwyer Instruments Series FBLT Submersible Level Transmitter

19 November, 2012

The Series FBLT Submersible Level Transmitter is designed with a flush diaphragm tip that will not clog in harsh applications such as sewage lift stations.


Dwyer Series ULL ultrasonic level transmitter

16 November, 2012

The Series ULL ultrasonic level transmitter for liquids is a direct-install level transmitter designed for non-contact measurement of levels.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd