Fast/Gigabit Ethernet switch
13 March, 2009 | Supplied by: Daanet Pty Ltd
The managed Fast/Gigabit Ethernet switch of the MACH1000 family from Hirschmann Automation and Control has all its ports with the exception of a service port located on the rear of the device. The 24 Fast Ethernet ports, up to four of which support PoE, are available with M12 connections as well as in any combination for other connectors such as MTRJ, St, SC or RJ45. For the gigabit uplinks, two combo ports (10/100/1000 Base-Tx) are optionally available and can be equipped with SFP fibre modules (1000 Base-Fx/SX/LX/LH). In this way, the new design offers a high bandwidth in combination with industry-proven M12 connection technology.
Hybrid Profinet cable
12 March, 2009 | Supplied by: HARTING Pty Ltd
The Harting Technology Group’s hybrid Profinet cables combine Profinet data and 24 V power distribution in a single cable, making installation easier and faster. The hybrid cable is suitable for use with the Harting Profinet Han 3A RJ45 connector family.
Modular ethernet connectors
12 March, 2009 | Supplied by: HARTING Pty Ltd
The Han-Modular series is a versatile, open connector system. Users can configure their own connectors which match the needs of their particular application.
Scalance ethernet switches
11 March, 2009 | Supplied by: Siemens Ltd
The Scalance XB-000 range of unmanaged industrial ethernet switches have IP20 protection, and are suitable for use in industrial environments that are not particularly harsh. Due to the compact box design, the low-cost switches can be fitted on a standard DIN rail in a control cabinet. The XB005, XB008, XB004-1 and XB004-1LD versions have up to eight standard RJ45 ports or four RJ45 ports and a fibre-optic port.
Fieldbus Foundation establishes Asia–Pacific Executive Advisory Council
11 March, 2009
The Fieldbus Foundation has established an Asia–Pacific Executive Advisory Council (AP-EAC), to help drive adoption of open, non-proprietary Foundation fieldbus technology in East Asia, South-East Asia, India, Australia and New Zealand.
PAANZ celebrates Profibus 20-year anniversary
05 March, 2009
The Profibus Association of Australia & New Zealand (PAANZ) will celebrate Profibus International's 20-year anniversary with a series of events, trade conferences and training seminars in capital cities.
Intelligent device management with EDDL
24 February, 2009 by Jonas Berge* | Supplied by: Emerson
EDDL technology was specifically designed with the process industry in mind. It is an integral part of the bus protocols used in process industries: HART, Foundation fieldbus and Profibus.
Common wireless fieldbus interface on track for 2009
11 February, 2009
The Wireless Cooperation Team is close to validating specifications and compliance guidelines for a common interface and wireless solution that supports the HART, Foundation fieldbus, Profibus and Profinet communications networks.
Profibus communication technology in wastewater treatment
10 February, 2009 by Nick Smith* | Supplied by: Pentair Valves & Controls
The key factor driving investment in wastewater treatment all over the world is cost reduction, and the only way to maintain high standards while reducing costs is to utilise highly sophisticated measurement and process control technology.
ORing appoints ICP Electronics as Australian distributor
22 January, 2009
ICP Electronics Australia has been appointed the Australian distributor for ORing Industrial Networking Corp.
Ethernet in harsh environments
21 January, 2009 | Supplied by: Fluke Australia Pty Ltd
Ethernet is the most prevalent LAN application worldwide, offering the benefits of standardisation, low-cost components and high-performance switching technology. It’s easy to configure and install.
Harting unveils field-level universal ethernet
08 December, 2008
The Harting Technology Group will use this year's SPS/IPC/DRIVES exhibition in Nuremberg to unveil ‘Fast Track Switching’, claimed to be the first system of its kind in the world that provides open and universal ethernet networking down to machine levels.
EtherNet/IP modules
01 December, 2008 | Supplied by: Omron Electronics Pty Ltd
EtherNet/IP (industrial protocol) is a global standard for industrial communications using ethernet. Using the low-cost infrastructure offered by ethernet, EtherNet/IP ensures customers have a cost-effective, high-performance network.
Stratix series ethernet switches
01 December, 2008 | Supplied by: Rockwell Automation Australia
Rockwell Automation has joined forces with Cisco to develop a comprehensive portfolio of industrial ethernet switches. The pairing provides businesses with improved access to solutions that optimise network integration throughout the enterprise — from the manufacturing floor through to the boardroom.
Ethernet switching hubs
01 December, 2008 | Supplied by: Omron Electronics Pty Ltd
Omron Electronics has released the W4S1 series of industrial switching hubs. Switching hubs are a requirement for all ethernet networks with three or more nodes. In the initial release, three models are available, with either three or five ports.
