Industrial networks & buses

Belden HiOS version 7.3

21 February, 2019 | Supplied by: Belden Australia Pty Ltd

The v7.3 software update enables Time-Sensitive Networking (TSN) support with an 802.1Qbv time-aware scheduler.


Acromag DT Series dual transmitters

11 February, 2019 | Supplied by: Metromatics Pty Ltd

The DT Series dual transmitters are designed to offer a space-saving solution to interface a variety of process and sensor signals to control systems.


WAGO 758-918 wireless Ethernet gateway

11 February, 2019 | Supplied by: WAGO Pty Ltd

WAGO's 758-918 wireless Ethernet gateway offers an IP65 degree of protection and has an internal directional antenna for use in harsh environments.


FDT Group releases Common Components update for FDT 2.1

08 February, 2019

FDT 2.1 DTM and FRAME Common Components simplify the digital transformation development path.


Bridging the gap between HART devices and the IIoT

06 February, 2019 | Supplied by: Moore Industries

The gradual introduction of Industrial Ethernet and wireless networks in process plants has meant that data exchange with corporate networks is becoming common.


R. Stahl IS1+ remote I/O system

05 February, 2019 | Supplied by: R. STAHL Australia Pty Ltd

The IS1+ Remote I/O system from R. Stahl allows Ethernet communication in hazardous areas via Profinet, Modbus TCP and EtherNet/IP.


Digital twins in the Fourth Industrial Revolution

04 February, 2019 by Praveen Kannan* | Supplied by: SICK Pty Ltd

Digtal twins are the key technology that will set Australia on the path to the Fourth Industrial Revolution.


ISA adopts FDT 2.0 as American national standard

29 January, 2019

FDT Group and the International Society of Automation (ISA) have announced that FDT 2.0 technology has been fully adopted as an ISA/ANSI American standard.


Advantech WISE-4210 series IoT wireless sensor devices

14 January, 2019 | Supplied by: Advantech Australia Pty Ltd

Advantech's WISE-4210 series of IoT wireless sensor devices includes a wireless LPWAN-to-Ethernet AP and three wireless sensor nodes.


Matrix Electronica M2M devices available in Australia

06 December, 2018 | Supplied by: Australis M2M Pty Ltd

Australis M2M Pty Ltd has announced it has acquired distributorship for Matrix Electronica's MTX range of M2M devices.


OPC UA including TSN initiative well accepted

04 December, 2018

The OPC UA including TSN initiative announced by OPC Foundation on 5 November has already been joined by many major industrial automation suppliers.


Schneider Electric endorses initiative to drive IIoT adoption

19 November, 2018 | Supplied by: Clipsal - by Schneider Electric

Schneider Electric will take a seat on the board of the OPC Foundation.


Hirschmann BOBCAT ethernet switch

13 November, 2018 | Supplied by: Belden Australia Pty Ltd

The Hirschmann BOBCAT switch is put forward as a solution for classic automation applications that require real-time communication and low latency.


OPC UA over TSN standard set to replace fieldbus technologies

09 November, 2018 | Supplied by: ABB Australia Pty Ltd

Just as HTML spurred growth of the web, the new OPC UA interoperability standard will unlock the full potential of Industry 4.0.


Rajant appoints Madison Technologies for its wireless mesh technologies

09 November, 2018 | Supplied by: Madison Technologies

Distributor appointment brings Rajant's Kinetic Mesh technology to IIoT applications.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd