PLCOpen-certified PAC platform
12 March, 2009 byGE Fanuc Intelligent Platforms has announced that it has received certificates of compliance from PLCopen, the independent organisation that focuses on the harmonisation of control programming around IEC 61131-2. PLCopen represents various industries and seeks to drive more efficiency in industrial automation through creating specifications and implementations in engineering programming language. GE Fanuc Intelligent Platforms fulfilled the requirements of the PLCopen Compliance Procedure for Motion Control Library V. 1.1 and PLCopen Compliance Procedure for Motion Control Part 2 — Extensions, Version 1.0.
4-port RS232 module
12 March, 2009 byAdvantech has launched the ADAM-5091 module equipped with four RS232 ports, making it especially suitable for bi-directional communication. The ADAM-5091 can simultaneously read data from other third-party devices such as a modem, bar code reader or PLC, as long as these devices are equipped with an RS232 interface.
Embedded controller
01 December, 2008The Simatic S7-mEC embedded controller is a turnkey automation solution, integrating both HMI and a software controller. As no software has to be installed during commissioning, the device is easy to configure and program.
Programmable logic controller
12 November, 2008The Click PLC is the first of a range of inexpensive PLC components designed to offer practical features in an easy-to-use, compact yet expandable design. This line of micro-brick PLCs with stackable I/O modules and free programming software is suitable for first-time users as well as experienced programmers.
Beckhoff wins Windows Embedded Partner Excellence Award
11 November, 2008Beckhoff has received the 2008 Windows Embedded Partner Excellence Award, in recognition of its innovative and creative application of Windows Embedded technology.
NHP and Inaco assume Rockwell distributions
07 November, 2008Inaco Automation Controls and NHP Electrical Engineering Products will assume distribution roles for Rockwell Automation products in Australia and New Zealand, effective 7 November 2008.
Multifunction timer
01 November, 2008The Eaton Durant E42A24M multifunction timer features an 11-pin base with two timed changeover outputs. The timer features seven multifunction modes that include on delay, off delay, single shot, percentage timer, pulse output, timing after a pulse, and timing after closing or opening a contact.
Ethernet-enabling serial devices in high availability manufacturing
23 October, 2008PLC or PC? This question can possible be answered by the PAC! The Programmable Automation Controller has grown dramatically in use and acceptance since 2001 – find out why in this tech paper.
Programmable automation controllers find their niche... everywhere!
23 October, 2008Learn how redundant Ethernet serial device servers can improve the reliability and robustness of your factory or plant’s communications systems in this Tech Paper from Advantech.
The power of integrated motion control
15 October, 2008System integrators and OEMs are faced with the challenge of designing machines that are more compact, less expensive and more reliable. This is a challenge that is greatly impacted by the components available to design into the machine.
Industry pushes science
29 September, 2008The Antarctic Plateau is considered the most inhospitable inhabited place on Earth. At Dome C, within the Australian Antarctic Territory, mid-winter minimum temperatures drop to -81°C and access to and from the outside world becomes impossible outside the very small window of 12 weeks, during which time the sun rises above the horizon.
Fastening tool controller
08 August, 2008Stanley Assembly Technologies has introduced the QA Alpha controller for DC electric fastening. The controller has enhanced process capabilities and easy-to-use Embedded Toolbox software. It is also compatible with the full range of Stanley QPM DC electric tools, from 0.6 to 2000 Nm and higher.
PLC
08 August, 2008Using the latest technology, the Eaton Logic Controller (ELC) is a reduced sized PLC with many module selections, providing only what you want for the price you desire.
Compact I/O modules
08 August, 2008High-density Allen-Bradley Compact I/O modules are now available from Rockwell Automation. The additions to the Allen-Bradley Compact I/O range include new high-performance analog, digital and ASCII modules that accommodate a range of applications while conserving panel space.
Compact field controllers
08 July, 2008National Instruments has announced three Compact Fieldpoint Controllers that deliver increased performance, higher processor speed and significantly improved ethernet throughput. The NI cFP-2220, cFP-2210 and cFP-2200 controllers include a 400 MHz PowerPC processor and Wind River VxWorks real-time operating system (RTOS) for greater processing power and faster data analysis.
