Sotera SP100 Series air-operated double diaphragm pump
28 April, 2014 | Supplied by: Hurll Nu-Way Pty LtdThe SP100 Series air-operated double diaphragm pump offers a claimed 20% improvement in air efficiency compared to competitive pumps.
Relpol MR-ET1P temperature monitoring relay
24 April, 2014 | Supplied by: Control Logic Pty LtdSometimes known as a PTC or thermistor relay, these devices monitor the temperature of a motor winding by use of up to six PTC thermistors.
CamdenBoss CamRack QX series 19″ wall-mounted cabinets
23 April, 2014 | Supplied by: RSThe CamRack QX series of 19″ wall-mounted cabinets from CamdenBoss are supplied flat-packed, which eases access to the installation site while reducing logistics costs and providing greater protection during transit.
SEW-Eurodrive hazardous area motors and gearmotors
14 April, 2014 | Supplied by: SEW-Eurodrive Pty LtdSEW-Eurodrive's hazardous area motors and gearmotors are now available in the Australian market, and are offered compliant with IECEx according to equipment protection levels (EPL) Gb and Gc (gas protection) and Db and Dc (dust protection).
Drive-based functional safety
03 April, 2014 | Supplied by: ABB Australia Pty LtdToday, new drive technology is making the previously complicated job of implementing a machine safety system much easier. Recent technical advances make safer operation less complex, while at the same time offering exciting new potential for productivity and uptime gains.
Taking a look on the inside
02 April, 2014 | Supplied by: Olympus Australia Pty LtdMost industrial facilities, such as steel mills, oil refineries and power stations, are expensive to build and operate, so minimising downtime is of prime concern for owners and operational staff. Any unplanned stoppages could cost millions of dollars each day.
Megger EZ-Thump power cable fault finder
31 March, 2014 | Supplied by: TechRentalsThe Megger EZ-Thump is suitable for HV testing, and incorporates a 12 kV hipot tester, time domain reflectometer (TDR) and surge generator. The device is available to rent.
Micsig handheld oscilloscope range
25 March, 2014 | Supplied by: Emona Instruments Pty LtdEmona Instruments has introduced the Micsig range of handheld oscilloscopes with touch-screen technology, offering bandwidths ranging from 70 up to 200 MHz, and a 1 GSa/s sampling rate.
Schneider Electric RM35JA32MW control relay
25 March, 2014 | Supplied by: element14The Schneider Electric RM35JA32MW control relay is designed to monitor for overcurrent or undercurrent, and provides adjustable time delays.
Flir T390 thermal imaging camera
05 March, 2014 | Supplied by: TechRentalsThe lightweight Flir T390, with a range of -20 to 1200°C, an improved refresh rate and laser locator, is suitable for almost any thermal imaging application.
Weidmüller DC-UPS 1.3 Ah battery
28 February, 2014 | Supplied by: Weidmuller Pty LtdWeidmüller has added a 1.3 Ah battery to its range of DC-UPS batteries, which now provides backup power from minutes to hours for automation components.
NORD Drivesystems SK 200E series pump drive system
20 February, 2014 | Supplied by: NORD Drivesystems (Aust) Pty LtdThe SK 200E series pump drive system comprises reliable and economical frequency inverters especially tailored to pump applications that precisely adjust power output as required.
Crystal Engineering GaugeCalHP 15,000 psi pressure comparator
14 February, 2014 | Supplied by: Transtek Pty LtdThe GaugeCalHP from Crystal Engineering (Ametek) is suitable for test and calibration use with water or oil, either in the field or the laboratory.
R. Stahl FX15 flashing beacons for hazardous areas
10 February, 2014 | Supplied by: R. STAHL Australia Pty LtdThe FX15 visual signalling solution withstands extreme environmental conditions, with a wide operating temperature range of -55 to +70°C and an enclosure manufactured from corrosion-resistant glass-reinforced polyester (GRP).
Turck overmoulded M40 powerfast connectors
06 February, 2014 | Supplied by: Turck Australia Pty LtdOffering a more robust connectivity solution than field-assembled versions, overmoulded M40 powerfast connectors are 100% factory tested to ensure optimal performance in harsh industrial automation applications.
