Robot programming GUI
01 November, 2008 | Marand Precision Engineering
SmartGUI is the graphical user interface for Kuka robots. Robots only work on instruction and the SmartGUI system is designed to enable that instruction be straightforward and simple.
Rotary screw compressor
01 November, 2008 | Kaeser Compressors Australia
The DSDX rotary screw compressor range has a compact design. Motor powers of either 132 or 160 kW provide air deliveries of 24 to 30 m3/min. Both models in the range (DSDX 243 and 302) are designed for pressures up to 15 bar.
Sonar transducer for level control
01 November, 2008 | Hawk Measurement Systems Pty Ltd
The line of ‘fourth-generation’ sonar transducers designed for improved sensing of interface levels in clarifiers and thickeners is available. The sensors claim improvements in overall power, penetration and calibration density range. They provide better capability under high suspended solids loading, ‘sliming’ and generally upset process conditions.
Component HMIs
01 November, 2008 | Rockwell Automation Australia
Suitable for OEMs and other industrial operators, the Allen-Bradley PanelView Component operator interface provides the right amount of control at a cost-effective price.
RTU for hazardous areas
01 November, 2008 | Ovarro
The Kingfisher G30 RTU has successfully completed the MET certification process for safety standards UL 1604, Electrical Equipment for Use in Class I and Class II, Division 2, and Class III Hazardous (Classified) Locations; and CSA 22.2 No. 213-M1987, Non-Incendive Electrical Equipment for Use in Class I, Division 2 Hazardous Locations.
Compact Modbus RTU master
01 November, 2008 | Moore Industries
The microNCS Modbus RTU master and distributed I/O system can be used to send just a few, or hundreds of, process signals between the field or factory floor and a control system.
ABB Australia low-voltage AC motors
01 November, 2008 | ABB Australia Pty Ltd
ABB Australia has launched low-voltage AC motors with improved energy efficiency and life cycle value. The motors are available from 0.06 to 95 kW while the frame size starts from 56, going all the way to 250. The range is classified into three ranges: general performance, industrial performance and process performance. Frame materials include cast iron and aluminium.
Multifunction timer
01 November, 2008 | Eaton Electrical (Australia) Pty Ltd
The Eaton Durant E42A24M multifunction timer features an 11-pin base with two timed changeover outputs. The timer features seven multifunction modes that include on delay, off delay, single shot, percentage timer, pulse output, timing after a pulse, and timing after closing or opening a contact.
Melt pressure transducers
01 November, 2008 | Bestech Australia Pty Ltd
The MPT160, MPT161 and MPT26X series are a range of melt pressure and temperature transducers that are constructed with a full bridge strain gauge circuit and are made wholly from stainless steel material. Additionally, the pressure diaphragm features a surface treatment with special alloy coating for all models.
OsiSense ultrasonic sensor
01 November, 2008 | Schneider Electric
The OsiSense ultrasonic sensor uses a piezoelectric transducer that acts as both transmitter and receiver and can detect any object without contact, regardless of the material, nature, colour or degree of transparency.
Laser-line profile sensor
01 November, 2008 | Bestech Australia Pty Ltd
The scanControl 2700/ 2710 laser line profile sensor from Micro-Epsilon can acquire profiles of the most varied target surfaces. Consisting of a compact sensor with integrated electronics, it is suitable for an industrial environment, especially in automation systems because of its relative small size. Typical tasks include measurement of profiles, angles, gaps and clearance.
Static neutralisers
01 November, 2008 | Bondline Static Control Solutions Pty Ltd
The Ion Power system from MKS ION Industrial is suitable for absolute static control management on all web converting applications and utilises the compact, modular plug-and-play design of the Virtual AC static neutralisers.
EDS-G308 gigabit ethernet switch
01 November, 2008 | CrispTech Pty Ltd
The Moxa EDS-G308 is equipped with 8 gigabit ethernet ports with up to two selectable fibre-optic 100/1000M SFP modules.
SCADA platform
01 November, 2008 | Miri Technologies
Areal is introducing version 5.0 of its Topkapi SCADA platform. With an SQL interface based on ADO.NET technology, it offers a flexible and effective link with database management systems such as Oracle, SQL Server and many others.
One-stop DP flowmeter solution
01 November, 2008 | Endress+Hauser Australia Pty Ltd
Although differential pressure (DP) flowmeters are based on a relatively inexpensive and mature technology, selecting and installing these devices is not simple and requires a reasonable level of engineering skill.
