Macrosensors GHS series LVDT-based gauging probes
10 March, 2010 | Bestech Australia Pty Ltd
Using electronic gauging probes for dimensional gauging of manufactured parts is a well-established quality assurance technique. Typical gauging probes are cylinders with diameters of about 9 mm and lengths ranging from 65 to 100 mm. They incorporate a non-contact inductive position sensor, either LVDT or half-bridge, which uses a spring-loaded movable armature coupled to a shaft that is supported in a high-precision linear bearing. They generally have a maximum gauging range of 0.25 to 2.5 mm, with resolutions of fractions of a micron.
West Control Solutions eCAL temperature controller
10 March, 2010 | Automated Control Pty Ltd
West Control Solutions has announced an enhancement of its CAL Controls brand temperature controller portfolio by introducing eCAL, a compact temperature and process controller with extended capabilities. The 1/16 DIN controller is easy to install and useful to retrofit and is suitable for stand-alone scientific and industrial process equipment.
Control Microsystems ClearSCADA and Longwatch video platform
10 March, 2010 | Control Microsystems
Control Microsystems and Longwatch have announced the ability of the Control Microsystems SCADA host platform, ClearSCADA, can now be integrated with the Longwatch Video Surveillance platform and Video Historian Platform to provide video surveillance of remote processes and assets over the SCADA communication infrastructure.
Turck 7/8-16UN explosion-proof feed-through receptacle
10 March, 2010 | Turck Australia Pty Ltd
The 7/8-16UN minifast explosion-proof feed-through receptacle is CSA certified as a secondary conduit seal. This quick-disconnect solution can serve as a secondary conduit seal to prevent gas migration or as a boundary seal, when used with a Turck CSA certified cordset. The receptacle may be applied in Class I, Division 2 locations without the use of intrinsically safe circuits or in Class I, Division 1 locations with intrinsically safe circuits.
Intergraph SmartPlant 3D enterprise engineering design software
10 March, 2010 | Intergraph Corporation Pty Ltd
Intergraph has released a version of SmartPlant 3D enterprise engineering design software that introduces capabilities for multiple 3D model referencing, enhanced model data re-use and laser scanning integration capabilities.
Allen-Bradley PowerFlex 753 AC drive
01 March, 2010 | Rockwell Automation Australia
The Allen-Bradley PowerFlex 753 AC drive has been optimised for general-purpose induction motor control applications, while maintaining the functionality of the PowerFlex 750 series.
Interworld Electronics USB-AI16-64M series high-density analog input modules
28 February, 2010 | Interworld Electronics and Computer Industries
The USB-AI16-64MA is a 64-channel, 16-bit resolution 500 kHz analog input module that includes 12 digital I/O lines.
Unidata 6526 open channel liquid flow logger
28 February, 2010 | TechRentals
The Unidata 6526 open channel liquid flow logger is a compact, easy-to-use system for measuring the velocity and depth of water in rivers and streams, open drainage channels and large pipes. It is now available for rent.
Allen-Bradley Kinetix 300 EtherNet/IP indexing servo drive
28 February, 2010 | Rockwell Automation Australia
The Allen-Bradley Kinetix 300 is a range of EtherNet/IP indexing servo drives designed to eliminate the need for a dedicated motion network, allowing easier commissioning, configuration and start-up of servo drives, motors and actuators.
Harting Han 3 A plastic housing
25 February, 2010 | HARTING Pty Ltd
The Han 3 A plastic housing with integrated cable clamp is 25% shorter than the standard version and can be combined with many existing contact inserts in the Han 3 A range.
National Instruments FlexRIO FPGA modules
25 February, 2010 | National Instruments Aust Pty Ltd
The NI FlexRIO FPGA modules for PXI Express and a baseband transceiver adapter module are designed to deliver optimised solutions for high-speed signal processing and other automated test and measurement applications. They also offer a commercial off-the-shelf (COTS) solution with NI LabVIEW FPGA technology and high-speed, reconfigurable I/O (RIO) for PXI and PXI Express systems.
Harting Han Q 4/2 connector
25 February, 2010 | HARTING Pty Ltd
The Han Q 4/2 connector used in automation and drive technology is now available with wiring technologies that dispense with the need for special tools. The power contacts are connected with the help of a standard hex key. The two signal contacts feature the Han-Quick Lock termination technology that requires no more than the use of a standard screwdriver.
Harting RJ Industrial 10G RJ45 connector
25 February, 2010 | HARTING Pty Ltd
The Harting RJ Industrial 10G is an RJ45 connector requiring no tools for connection. It features a design suitable for future 10 Gb ethernet use, and the connection is made reliably and quickly using proven insulation displacement terminal technology.
Harting Ha-VIS preLink ethernet extension connectors
25 February, 2010 | HARTING Pty Ltd
Harting Ha-VIS preLink is designed for use with a wide range of mating faces such as RJ45 to IP20, RJ45 PushPull according to IP65/67 or M12, and is also compatible with future 10GbE transmission rates.
VEGA VEGAMIP 61 microwave barrier
25 February, 2010 | VEGA Australia Pty Ltd
The VEGAMIP 61 microwave barrier is designed for the requirements and special needs of the bulk solids industry. Since the microwave barrier measures contactlessly, VEGAMIP has no direct contact with the medium. This makes the device suitable for abrasive products or very high temperatures. VEGAMIP 61 can measure from the outside through a microwave-permeable window, for example, of ceramic or plastic.
