FCI MT91 multipoint gas mass flowmeter
06 May, 2010 | AMS Instrumentation & Calibration Pty Ltd
The MT91 multipoint gas mass flowmeter from Fluid Components International (FCI) has been tested by TÜV Rheinland Germany and found to comply to EN 15267-1: 2009, EN 15267-2: 2009, EN 15267-3: 2007 and EN 14181: 2004.
Hydac screw pumps
06 May, 2010 | HYDAC International
The Hydac screw pumps are suitable for industrial applications where high reliability and low noise are required. They produce low vibration and are optionally coupled with electrical motors.
Interworld Electronics QSU2-540 industrial communications module
06 May, 2010 | Interworld Electronics and Computer Industries
The QSU2-540 industrial communications module has four independent serial ports with each port able to support RS232, RS422 or RS485 protocols.
Fluke TiR32 thermal image camera
06 May, 2010 | TechRentals
The Fluke TiR32 thermal image camera can scan large areas quickly to detect problems or the extent of any damaged caused. The handheld instrument gives the clear, crisp images needed to find problems quickly with its 320 x 240 sensor and it is available to rent.
Hirschmann Eagle Tofino security switches
28 April, 2010 | Belden Australia Pty Ltd
Belden has announced a range of zone-level security switches that are designed to protect control systems against network problems and cyber threats. The Hirschmann Eagle Tofino range combines a security appliance with a collection of software modules that are intended to together provide practical and effective industrial network security that is simple to implement and does not require plant shutdowns.
Switchcraft sealed, locking power jacks and plugs
28 April, 2010 | Clarke & Severn Electronic Solutions
Switchcraft has added sealed, locking power jacks and plugs to its range of DC connectors.
FastLinc FLC820G IEEE 802.11 ethernet wireless modems
28 April, 2010 | Wired & Wireless Solutions International
Wired & Wireless has released the FastLinc range of IEEE 802.11 industrial ethernet wireless modems using 2.4 GHz direct sequence technology. With an output power much higher than commercial 802.11b/g products and with a rugged design, the FastLinc range is suitable for industrial SCADA and factory automation systems.
Control Microsystems SCADAPack ProductionPLUS
28 April, 2010 | Control Microsystems
Control Microsystems has announced the release of SCADAPack ProductionPLUS, a pad-wide optimisation solution combining EFM and plunger lift for 30+ wells per pad. It leverages the functionality and flexibility of the company’s product suite to provide gas operators with an efficient wireless or wired sensor to enterprise application.
ABB Endura AZ20 combustion gas analyser
28 April, 2010 | ABB Australia Pty Ltd
Manufactured using a ceramic-to-steel bonding process, the Endura AZ20 combustion gas analyser offers improved resistance to thermal stresses and shocks compared to a conventional brazed design. This enables it to be used in a wider range of applications subject to sudden variations in process temperature, as well as offering a gas tight bond throughout its operating temperature range.
Festo MS6-LRP-PO precision pressure regulator
28 April, 2010 | Festo Pty Ltd
The MS6-LRP-PO precision pressure regulator from Festo is suitable for use in the automotive industry and can now be used in balancer applications.
Banner Engineering iVu remote touch screen display
28 April, 2010 | Micromax Pty Ltd
The iVu remote touch screen display from Banner Engineering is designed to deliver easy-to-apply yet comprehensive vision inspection to hard-to-access areas.
CompAir SmartAir Master compressor controller
28 April, 2010 | CompAir (Australasia) Limited
CompAir has launched SmartAir Master, claimed to be a simple-to-install control system that provides detailed management reports to help plant engineers improve the performance and efficiency of a compressor network.
Eltra precision rectilinear potentiometers
28 April, 2010 | Automated Motion Systems Pty Ltd
The Automated Motion Systems Eltra precision rectilinear potentiometers are suitable for automation applications where analog position feedback is required in linear motion control systems. They are commonly used with pneumatic, electric or hydraulic actuators.
Tolomatic IMA integrated-motor rod-style actuator
28 April, 2010 | Pneumatic Products
Tolomatic’s integrated-motor rod-style actuator (IMA) is now capable of delivering up to 14.6 kN of force when equipped with the roller-screw option. The actuator incorporates a hollow-core rotor and skewed motor windings into its servomotor design for a compact package with increased dynamic performance and service life compared to traditional rod-style actuators. The integrated motor design is suitable for applications such as pressing, clamping, valve control, spot welding and volumetric filling.
Parker CCIMS level-flange integrated DP manifold concept
28 April, 2010 | Parker (Aust) Pty Ltd
The CCIMS level-flange, a highly integrated manifold concept from Parker Hannifin, is designed to offer users a simpler means of installing level measurement instrumentation to process tanks and vessels.
