CRIUS Solisense turbidity meter
21 June, 2010 | Bintech Systems Pty Ltd
The CRIUS Solisense turbidity meter ranges from 0.02 NTU (FTU) to 8% solids and is claimed to be unique in its ability to measure from NTU to percent solids in one sensor. It is suitable for potable water monitoring, filter monitoring, mixed liquor suspended solids monitoring, sludge monitoring centrate monitoring, filtrate monitoring and other applications where a traditional turbidity meter or suspended solids analyser would be used.
Futek LPM200 panel-mount load cell
21 June, 2010 | Metromatics Pty Ltd
The Futek LPM200 panel-mount load cell offers miniature size, a robust flexure and low capacity of 10 g to 2.2 kg. A common challenge for low-capacity sensors is the damage the sensor can incur during installation. With the LPM200’s design, this challenge has been greatly minimised. The product features an overload protection of 1000% of rated output for the full range. By threading the flexure, the LPM200 can easily be installed for usage. The LPM200 uses a tough 28 AWG 4-conductor braided shield clear PVC cable.
ABB WaterMaster self-verifying electromagnetic flowmeter
21 June, 2010 | ABB Australia Pty Ltd
ABB has announced that their electromagnetic WaterMaster flowmeter, designed specifically for the water, wastewater and effluent sewage markets, now has an in-situ flowmeter verification capability. Built into the flowmeter the VeriMaster system has the ability to perform in-situ verification across the full range.
Invensys Operations Management Triconex Trident safety system v2.1.1
21 June, 2010 | Invensys Process Systems (S) Pte Ltd
Invensys Operations Management has announced the availability of version 2.1.1 of its Triconex Trident safety system. Two input modules are now provided that are designed to enhance worker safety, reduce downtime and deliver more accurate trip analysis in power and turbomachinery applications. One module enables faster response to unsafe equipment conditions; another optimises trip data analysis to prevent future upsets.
Hydac CMU 1000 online condition monitoring unit
21 June, 2010 | HYDAC International
The CMU 1000 is an electronic evaluation unit for permanent online condition monitoring of machines and systems. Data recorded from sensors (processed or unprocessed) can be transferred by the device via different ports or as an analog value to other devices or monitoring levels.
K-Tek Beta pressure and temperature switches
21 June, 2010 | Fluid Control Sales & Installations Pty Ltd
K-Tek’s Beta line of pressure and temperature switches have been certified for operation in Safety Integrity Level 2 (SIL2) environments. To obtain SIL2 certification, the products must be analysed based on quantitative data and tests indicating the length of time between failures and expected performance in the field.
Ethernet Direct CME-822E 10-port SNMP-managed PoE switch
20 June, 2010 | Ethernet Direct
The CME-822E is a fault-tolerant industrial 10-port SNMP-managed PoE switch that supports eight PSE-classified PoE injector ports. Dual SFP sockets are also provided, for installation of fast ethernet or gigabit mini-GBIC modules, and providing the flexibility to support multimode, singlemode or WDM fibre optic supporting various distances up to 120 km.
Burkert SideControl 8791 valve positioner
17 June, 2010 | Burkert Fluid Control Systems
The 8791 positioner is the basic version of the SideControl 8792 and 8793 positioners and is specially designed for ease of operation. The SideControl 8791 features the same pneumatic positioning system for control accuracy and dynamics.
Burkert 8026, 8036 and 8076 digital flow transmitters
17 June, 2010 | Burkert Fluid Control Systems
The 8026, 8036 and 8076 model digital flow transmitters are now made in the consistent stainless steel design of the Element series.
Burkert LFC (liquid flow controller)
17 June, 2010 | Burkert Fluid Control Systems
The LFC (liquid flow controller) is fully compatible with Bürkert’s range of mass flow controllers (MFC). It complements the company’s range of compact fluid control devices for the measurement and dosage of liquids with a nominal flow rate of 10-600 mL/min and a span of 1:10. The LFC is based on the proven and tested software, hardware and mechanics of the MFC series. Due to its compact design, the controller can be installed in difficult locations, such as directly behind angled piping.
National Instruments CompactRIO PROFIBUS C Series modules
17 June, 2010 | National Instruments Aust Pty Ltd
Interfaces for PROFIBUS, FOUNDATION Fieldbus and DeviceNet that make it possible for engineers to connect LabVIEW, programmable automation controllers (PACs) and embedded systems to their existing industrial networks have been announced.
Endress+Hauser Waterpilot FMX21 submersible pressure sensor
17 June, 2010 | Endress+Hauser Australia Pty Ltd
The Waterpilot FMX21 is a high-precision, robust submersible pressure sensor for hydrostatic level measurement, in fresh water, wastewater and salt water.
Endress+Hauser Prosonic T FMU30 ultrasonic level sensor
17 June, 2010 | Endress+Hauser Australia Pty Ltd
The Prosonic T FMU30 is an economical ultrasonic level sensor and transmitter with many of the high-end features found in more expensive devices.
Rockwell Automation FactoryTalk Historian ME
10 June, 2010 | Rockwell Automation Australia
FactoryTalk Historian Machine Edition (ME) is a machine-level historian that collects data directly from the backplane of the controller. This solid-state, embedded historian module is hardened for on-machine data collection and features a limited software footprint, no moving parts and reduced risk of data loss due to network or other system interruption.
National Instruments SC Express family PXI DAQ modules
09 June, 2010 | National Instruments Aust Pty Ltd
National Instruments has announced the company’s first data acquisition (DAQ) modules with integrated signal conditioning on PXI Express. The SC Express family offers increased accuracy, high data throughput and synchronisation for measuring strain gauges, bridge-based transducers, thermocouples and high-voltage analog inputs. PXI Express provides 250 MBps of dedicated bandwidth for each SC Express module in the chassis.
