SMC JXC series direct-input step motor controller
11 September, 2017 | SMC Australia | New ZealandThe JXC series direct-input step motor controller now offers three additional communication protocols, namely DeviceNet, EtherCAT and Profinet, in addition to the EtherNet/IP fieldbus protocol that was available on previous models.
Allen-Bradley VersaView 5000 computers, thin clients and monitors
08 September, 2017 | Rockwell Automation AustraliaOffering an open architecture design, the VersaView 5000 industrial computers, thin clients and monitors are designed to help manufacturers modernise their standalone or distributed HMI applications to support smart manufacturing.
Reer Magnus RFID safety sensors
08 September, 2017 | Treotham Automation Pty LtdThe Magnus RFID sensors from Reer have a wide application range due to the compact and versatile design. They are mechanically compatibility with the Magnus MG series.
Siemens SITRANS FC430 Coriolis flowmeter
07 September, 2017 | Siemens LtdThe digitally based SITRANS FC430 Coriolis flowmeter features a compact size, a high accuracy of 0.1%, low pressure loss, a stable zero point and a data update rate of 100 Hz.
DYNISCO SPX-T melt pressure transmitters
06 September, 2017 | Heastern IndustriesThe SPX-T melt pressure transmitter is capable of eliminating thermal zero shift, a common problem with melt pressure transmitters, where their measured pressure output varies at low pressure between a cold extruder, and elevated running temperatures once operational.
Antaira Technologies LNP-1604G-SFP series PoE+ Ethernet switches
05 September, 2017 | Antaira TechnologiesAntaira Technologies' LNP-1604G-SFP series 16-port industrial unmanaged PoE+ Ethernet switches offer flexible connectivity and the convenience of Power over Ethernet.
TriOS enviroFlu oil-in-water sensor
04 September, 2017 | Control Components Pty LtdThe enviroFlu is a submersible sensor for the measurement of oil in water. It utilises a UV fluorescence measuring principle rather than the more conventionally used infrared scattering or absorption methods.
Michell Instruments XZR250 oxygen analyser
04 September, 2017 | AMS Instrumentation & Calibration Pty LtdThe Michell Instruments XZR250 oxygen analyser is designed for monitoring combustion control in industrial boilers and uses a zirconium-oxide sensor with a life span of up to seven years.
Ralston Instruments DCAP calibration test pump
04 September, 2017 | Transtek Pty LtdThe DCAP pneumatic hand pump from Ralston Instruments is specifically designed for use in pressure calibration and test applications in the oil and gas, petrochemical, maritime, pharmaceutical and aerospace industries.
Neousys Technology Nuvo-6018GC industrial GPU computer
01 September, 2017 | Backplane Systems Technology Pty LtdThe Nuvo-6018GC is an industrial-grade GPU computer supporting high-end graphics cards. It is designed to handle heavy power consumption over a wide operating temperature range.
Dwyer Series 629C wet/wet differential pressure transmitter
01 September, 2017 | Dwyer Instruments (Aust) Pty LtdThe Series 629C wet/wet differential pressure transmitter monitors differential pressure of air and compatible gases and liquids with 0.5% accuracy.
Advantech compact IPCs for machine builders
01 September, 2017 | Advantech Australia Pty LtdAdvantech is launching a series of rackmount IPCs featuring a small footprint, simple manageability and easy maintenance. These machine builder IPCs feature short depth, self-diagnosis, remote manageability and modularised design.
ifm efector SM4000 inductive flow sensor
01 September, 2017 | ifm efector pty ltdThe SM4000 inductive flow sensor is suitable for conductive liquids with flow rate of 5–3000 mL/min with a conductivity down to 20 µS/cm.
Druck DPI 620 Genii multifunction calibrator and communicator
01 September, 2017 | TechRentalsThe Druck DPI 620 Genii combines an advanced multifunction calibrator and HART/Foundation Fieldbus communicator with pressure measurement and generation.
optec Haze Control 4000 photometric converter
01 September, 2017 | AMS Instrumentation & Calibration Pty LtdThe optec Haze Control 4000 photometric converter has been specifically engineered for high-precision haze (turbidity) measurements.
