Flexicon low-profile combination bulk bag/drum filler

Flexicon has released a low-profile, combination bulk bag/drum filler that allows filling of bulk bags and drums in low headroom areas.

When filling bulk bags, full-length forklifting tubes integral to the rear-post fill head allow incremental height adjustments secured with hitch pins to accommodate bags of sizes from 1000 to 1500 mm tall, and widths to 1150 mm. The filler is equipped with an inflatable bag spout seal, a feed chute dust vent and a low-profile densification deck that de-aerates material in bags weighing up to two tonnes as they are being filled.

A remote console or wall-mounted panel houses controls to automatically inflate the bag to remove creases, open a flow control valve or start a feed device, and stop the flow of material once a preset fill weight has been gained. The vibratory deck de-aerates and densifies material in the bag at preset setpoints to create a solid, stable bag, ready for shipment.

The unit can be switched to drum-filling mode by positioning the swing arm-mounted drum-filling chute under the fill head discharge port. The attachment has an adaptable seal to handle drums measuring up to 570 mm in diameter and 900 mm in height. When filling one drum, initiating a filling cycle delivers a programmed weight of material to the drum. When filling two, three or four drums, the feed chute automatically indexes after each drum is filled, reducing operator involvement to initiating the cycle and removing the palletised drums.