ZigSense Model ZS-P2MP-002 point-to-multipoint wireless cable replacer system

Friday, 17 May, 2013 | Supplied by: Zigsense


ZigSense Model ZS-P2MP-002 is the latest addition to the ZS-P2P-001 wireless cable replacer system. It supports point-to-multipoint (P2MP) technology transferring wired sensors data and I/O control commands between a local master node and two slave nodes installed in separate remote locations.

High-speed communications combined with ZigSense P2MP bidirectional data transfer enable digital and analog signals to be reliably transferred over short, medium or long distances using licence-free 2.4 GHz, 900 MHz or 868 MHz radio frequencies. Analog signals such as tank level, temperature, pressure and flow, as well as digital signals for alarm conditions or devices such as pumps, motors and start/stop switches can be exchanged simultaneously between a master node in one location and two slave nodes in other locations - eliminating the need for long cables, conduits or cable trenches.

Upon loss of communication, ZigSense wireless cable replacer nodes will deactivate their outputs based on the default fail-safe mode. A local independent alarm output can be used to sound a siren or a buzzer.

Online: www.zigsense.com.au
Phone: 03 5911 7055
Related Products

HMS Networks Anybus Defender industrial network security appliances

The Anybus Defender series provides a firewall to protect operational technology (OT) networks.

Rosemount 802 wireless multi-discrete I/O transmitter

The Rosemount 802 has eight discrete I/O channels, each one configurable as an input or an...

IDEC SX8R bus coupler module

The IDEC SX8R bus coupler module is designed to facilitate flexible control signal connectivity.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd