Turck BIM-UNR position sensors for C-groove cylinders

Thursday, 08 April, 2010 | Supplied by: Turck Australia Pty Ltd


The BIM-UNR line of compact magnetic cylinder position sensors now includes a dual sensor designed for detecting short and long stroke C-groove cylinders. BIM-UNR dual sensors combine two sensors through one cable connection to speed installation, as well as lessen wire costs and connection points. This design makes the sensor beneficial in areas where multiple cylinders are used, as it only requires a single cable. With dimensions of 2.9 x 4.6 x 18 mm, the sensors feature a low profile.

The sensor mounts within C-groove cylinders with no accessories required. It can be inserted into a C-groove from the top rather than from the side, further simplifying installation. On the sensor’s side is a built-in tab that keeps the sensor in place to facilitate one-handed mounting. As the mounting screw is located near the cable exit, the sensor remains fastened even if the cable is pulled.

Online: www.turck.com.au
Phone: 1300 132 566
Related Products

IDEC SA1N subminiature photoelectric sensors

IDEC Corporation has expanded its photoelectric sensor range with the SA1N series of space-saving...

Leuze ROD 300 and ROD 500 series laser scanners

The ROD 300 series scanners are designed for contour detection while the ROD 500 series are...

Ximea ixX-XL Series PCIe cameras

The xiX-XL Series cameras are engineered to offer high performance while maintaining minimal...


  • All content Copyright © 2025 Westwick-Farrow Pty Ltd