SmartLevel capacitive sensors detect the levels of aqueous to highly conductive media. Annoying deposits, contamination, liquid films and foam formant are reliably masked out. The SmartLevel 500+ sensor is designed for highly conductive media such as sulfuric and hydrochloric acid or concentrated cleaning agents.
Designed for a conductivity of approximately 50–500 mS/cm and greater, the SmartLevel 500+ detects the level either in direct contact or through plastic or glass containers with wall thicknesses of up to 10 mm. The non-flush mountable sensor is available in an M30 x 1.5 housing with PNP or NPN normally open or normally closed output. The user can choose between stainless steel or a fully PTFE encased housing with IP67 protection.
The sensor is designed for an ambient temperature of -10 to +60°C. The stainless steel version is connected via a 4-pin M12 plug, with power and switching state indicated by a green and yellow LED respectively.
The PTFE version features a housing fully encased in PTFE, with a red LED for function indication and a 2 m-long PTFE cable.
The sensor can detect levels through plastic or glass walls, without the need for holes or openings. Typical applications include sensing liquid, strongly adhering foods such as ketchup and mustard etc or detecting highly conductive effluents, saline solutions and acids.
Phone: 03 9720 4100
Leuze Series 33C and 35C photoelectric sensors
The Leuze Series 33C and 35C each include stainless steel sensors designed for packaging...
Leuze IS 200 series long-range inductive proximity sensors
The IS 200 series inductive sensors enable switching distances of up to 40 mm in compact,...
Turck BI11-CK40 and NI11-CK40 inductive sensors
Turck is expanding its inductive sensor range with flush and non-flush mount inductive measuring...
