Wenglor weFlux²micro compact pressure sensor
Confined mounting spaces and compact system structures are a major challenge for the pressure measurement of liquids and gases. With a small diameter of 14 mm, the Wenglor weFlux²micro pressure sensor enables measurements at previously inaccessible locations. Pressure ranges between –1 and +25 bar can therefore be measured in hydraulic clamping systems, tight lubrication bearings or compact 3D printers.
Smaller than an AA battery, the sensor also has a small process connection with M5 thread and also 22 mm high, making it suitable for extremely tight systems. With a low weight of 13 g it can be mounted on robot arms and moving system parts.
The weFlux²micro has a response time of less than 1 ms and a measurement error of less than 0.5%, and is built in a robust 316L stainless steel housing with IP68 protection. It offers a 4–20 mA analog output, and positive-locking segmented cable compression provides additional protection in the event of mechanical tensile and rotational loads.
Phone: 1300 65 75 64
ABB IRB 7710 and IRB 7720 robots
ABB Robotics has expanded its modular large robot range with the introduction of the IRB 7710 and...
Siemens Simatic S7-1200 G2 controllers
The Simatic S7-1200 G2 controllers offer higher communication performance and more efficient data...
SMC EQ Series actuators with integrated controller
SMC Corporation's EQ series of slide-type and rod-type actuators include an integrated...
Learn More
I am interested in Wenglor weFlux²micro compact pressure sensor.
Complete the form and a supplier representative will be in touch.
