Fluke Corporation recalls digital clamp meters

Fluke Corporation is voluntarily recalling certain digital clamp meters that were manufactured between 1 September 2010 and 1 October 2012. A hazard has been identified in which the printed circuit assembly in these units may not be properly fastened to the test lead input jack. This may result in inaccurate voltage readings, including a low or no voltage reading on a circuit energised with a hazardous voltage, presenting a shock, electrocution or thermal burn hazard.

The products affected are the Fluke 373, 374, 375 and 376 digital clamp meters. This voluntary recall involves Fluke digital clamp meters with the model and serial numbers listed below. Any serial number preceded or followed by the letter ‘R’ is NOT affected by this recall notice.

If you own one of these clamp meters, please stop using it and send it back to Celemetrix Pty Ltd (Fluke Australia’s authorised service provider) for repair. If you are not the primary user of the Fluke 37X Series clamp meter, please pass this notice along to the appropriate people within your organisation. Please send only the clamp meter; any test leads/boxes/manuals that are sent with the unit will NOT be returned.

Fluke has set up a web link to check if a unit is affected by the recall at www.fluke.com/fluke/auen/support/Safety/37X-Recall.htm.

Select your model name, enter the serial number and click the ‘Check’ button. If the unit is within the affected serial number range, contact the local service agent using the link provided, or contact:

Celemetrix Australia Pty Ltd
Service Centre
20 Joseph Street
Blackburn North
VIC 3130
AUSTRALIA
1 (800) 256 838
+61-3-9897-0555
http://www.celemetrix.com.au