Phoenix Contact QPD installation system for large cross-section litz wire
Phoenix Contact has extended its existing QPD installation system with a five-position version for the 2.5 to 6.0 mm2 cross-section range.
The advantage of the connectors is the IDC fast-connection technology. This enables up to 80% time savings during installation when connected in the field. For installation, the cable sheath is removed and the litz wires are arranged in the splice body, cut flush, and screwed - no special tools are required. The IDC contacts themselves can withstand a load of 40 A and 690 V.
With their robust design, the connectors support flexible use. They satisfy the requirements of protection classes IP68/IP69k and IK07 impact strength. The range includes panel feed throughs with M25 thread, cable connectors, connectors, and distributors in H and T format.
The QPD installation system is also available in four- and five-position versions for cross-section ranges from 1.0 to 2.5 mm2.
Phone: 1300 786 411
Phoenix Contact Trio Power power supply
The third-generation Phoenix Contact Trio Power power supply is now available with a protective...
Phoenix Contact PTCB 48 VDC circuit breakers
The PTCB single-channel circuit breakers can now protect loads with a supply voltage of 48 VDC.
NORD Drivesystems single-phase IE2 motors
The more efficient single-phase asynchronous motor now corresponds to efficiency class IE2.